On Fri, Sep 09, 2022 at 11:30:01AM +0200, Astrid Rost wrote:
ti,jack-detect enables the jack detection input device
New properties need to be documented, I'm happy for that to be in the existing document though obviously a conversion to YAML would be very much appreciated. However...
- if (enable) {
/* Enable Headset and 4 Buttons Jack detection */ts3a227e->jack = devm_kzalloc(component->dev,sizeof(struct snd_soc_jack), GFP_KERNEL);ret = snd_soc_card_jack_new_pins(card, "Headset Jack",SND_JACK_HEADSET |SND_JACK_BTN_0 | SND_JACK_BTN_1 |SND_JACK_BTN_2 | SND_JACK_BTN_3,ts3a227e->jack,ts3a227e_jack_pins,ARRAY_SIZE(ts3a227e_jack_pins));if (ret)return ret;ret = ts3a227e_enable_jack_detect(component, ts3a227e->jack);- }
...this is something that should be done in the machine driver rather than the CODEC, the way the device is wired up in an individual system may be surprising or the system may have some more specific labelling that can be usefully applied so this is all deferred to the card.
It would sense to convert ts3a277e_enable_jack_detect() to be a component set_jack() operation, that'd enable it to be used more easily with generic cards (though I see that it's not yet wired up for audio-graph-card unfortunately).