On Wed, Mar 24, 2021, 7:16 PM Joakim Tjernlund < Joakim.Tjernlund@infinera.com> wrote:
On Wed, 2021-03-24 at 18:51 +0800, Ikjoon Jang wrote:
Logitech ConferenceCam Connect is a compound USB device with UVC and UAC. Not 100% reproducible but sometimes it keeps responding STALL to every control transfer once it receives get_freq request.
This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419 Signed-off-by: Ikjoon Jang ikjn@chromium.org
Most Logitech USB headset I got needs a delay in snd_usb_ctl_msg_quirk() Have you tried to add say 20 ms delay in there?
I didn't try that. But it sounds reasonable to me.
let me try that quirk here. If that is the case, HID might need that delay also. Logitech Group webcam had a similar problem on control xfer of get_report from an another interface for HID.
And 20ms can be too long if it's applied to every control transfer. I will test the device with shorter delay if you didn't try it before.
Any additional advice is welcome.
Thanks!
Jocke