TAS5721 datasheet recommends to wait at least 13.5ms after deasserting the RESET signal. For TAS5717 this time is only 12ms, which was the original value in the code.
Extend the wait time after deasserting RESET from 12 to 13.5ms to comply with the TAS5721 specification.
Signed-off-by: Petr Kulhavy brain@jikos.cz --- sound/soc/codecs/tas571x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index e996313..4d61357 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -748,7 +748,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, /* pulse the active low reset line for ~100us */ usleep_range(100, 200); gpiod_set_value(priv->reset_gpio, 0); - usleep_range(12000, 20000); + usleep_range(13500, 20000); }
ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0);