Currently both FE and BE dai-links are configured bi-directional, However the DSP BE dais are only single directional, so set the directions as supported by the BE dais.
Fixes: c25e295cd77b (ASoC: qcom: Add support to parse common audio device nodes") Reported-by: John Stultz john.stultz@linaro.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org --- sound/soc/qcom/common.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index 6c20bdd850f3..8ada4ecba847 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -4,6 +4,7 @@
#include <linux/module.h> #include "common.h" +#include "qdsp6/q6afe.h"
int qcom_snd_parse_of(struct snd_soc_card *card) { @@ -101,6 +102,15 @@ int qcom_snd_parse_of(struct snd_soc_card *card) } link->no_pcm = 1; link->ignore_pmdown_time = 1; + + if (q6afe_is_rx_port(link->id)) { + link->dpcm_playback = 1; + link->dpcm_capture = 0; + } else { + link->dpcm_playback = 0; + link->dpcm_capture = 1; + } + } else { dlc = devm_kzalloc(dev, sizeof(*dlc), GFP_KERNEL); if (!dlc) @@ -113,12 +123,12 @@ int qcom_snd_parse_of(struct snd_soc_card *card) link->codecs->dai_name = "snd-soc-dummy-dai"; link->codecs->name = "snd-soc-dummy"; link->dynamic = 1; + link->dpcm_playback = 1; + link->dpcm_capture = 1; }
link->ignore_suspend = 1; link->nonatomic = 1; - link->dpcm_playback = 1; - link->dpcm_capture = 1; link->stream_name = link->name; link++;