On Mon, Feb 5, 2018 at 3:01 PM, Daniel Baluta daniel.baluta@nxp.com wrote:
Document the bindings for AK5558 ADC.
Signed-off-by: Daniel Baluta daniel.baluta@nxp.com
Documentation/devicetree/bindings/sound/ak5558.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt
diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 0000000..7d67ca6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,22 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC
+This device supports I2C mode only.
+Required properties:
+- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device.
+Optional properties:
+- reset-gpios: A GPIO specifier for the power down & reset pin.
+Example:
+&i2c {
ak5558: adc@10 {
If I understood well Rob's suggestion was to make it only:
adc@10 {
Other than that:
Reviewed-by: Fabio Estevam fabio.estevam@nxp.com