Later commits adding support for hda platform drivers will want to use the same defines and structures. Put them in a place reachable by both hda_intel and the new platform driver.
This is a mostly a direct copy with a few whitespace and comment changes to make checkpatch happy.
Signed-off-by: Dylan Reid dgreid@chromium.org --- sound/pci/hda/hda_intel.c | 366 +----------------------------------------- sound/pci/hda/hda_priv.h | 398 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 399 insertions(+), 365 deletions(-) create mode 100644 sound/pci/hda/hda_priv.h
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e8a9e87..da717b5 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -63,6 +63,7 @@ #include <linux/firmware.h> #include "hda_codec.h" #include "hda_i915.h" +#include "hda_priv.h"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; @@ -149,10 +150,8 @@ MODULE_PARM_DESC(align_buffer_size, static bool hda_snoop = true; module_param_named(snoop, hda_snoop, bool, 0444); MODULE_PARM_DESC(snoop, "Enable/disable snooping"); -#define azx_snoop(chip) (chip)->snoop #else #define hda_snoop true -#define azx_snoop(chip) true #endif
@@ -199,238 +198,7 @@ MODULE_DESCRIPTION("Intel HDA driver");
/* - * registers */ -#define ICH6_REG_GCAP 0x00 -#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ -#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ -#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ -#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ -#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ -#define ICH6_REG_VMIN 0x02 -#define ICH6_REG_VMAJ 0x03 -#define ICH6_REG_OUTPAY 0x04 -#define ICH6_REG_INPAY 0x06 -#define ICH6_REG_GCTL 0x08 -#define ICH6_GCTL_RESET (1 << 0) /* controller reset */ -#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ -#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ -#define ICH6_REG_WAKEEN 0x0c -#define ICH6_REG_STATESTS 0x0e -#define ICH6_REG_GSTS 0x10 -#define ICH6_GSTS_FSTS (1 << 1) /* flush status */ -#define ICH6_REG_INTCTL 0x20 -#define ICH6_REG_INTSTS 0x24 -#define ICH6_REG_WALLCLK 0x30 /* 24Mhz source */ -#define ICH6_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ -#define ICH6_REG_SSYNC 0x38 -#define ICH6_REG_CORBLBASE 0x40 -#define ICH6_REG_CORBUBASE 0x44 -#define ICH6_REG_CORBWP 0x48 -#define ICH6_REG_CORBRP 0x4a -#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ -#define ICH6_REG_CORBCTL 0x4c -#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ -#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ -#define ICH6_REG_CORBSTS 0x4d -#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ -#define ICH6_REG_CORBSIZE 0x4e - -#define ICH6_REG_RIRBLBASE 0x50 -#define ICH6_REG_RIRBUBASE 0x54 -#define ICH6_REG_RIRBWP 0x58 -#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ -#define ICH6_REG_RINTCNT 0x5a -#define ICH6_REG_RIRBCTL 0x5c -#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ -#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ -#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ -#define ICH6_REG_RIRBSTS 0x5d -#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ -#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ -#define ICH6_REG_RIRBSIZE 0x5e - -#define ICH6_REG_IC 0x60 -#define ICH6_REG_IR 0x64 -#define ICH6_REG_IRS 0x68 -#define ICH6_IRS_VALID (1<<1) -#define ICH6_IRS_BUSY (1<<0) - -#define ICH6_REG_DPLBASE 0x70 -#define ICH6_REG_DPUBASE 0x74 -#define ICH6_DPLBASE_ENABLE 0x1 /* Enable position buffer */ - -/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ -enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; - -/* stream register offsets from stream base */ -#define ICH6_REG_SD_CTL 0x00 -#define ICH6_REG_SD_STS 0x03 -#define ICH6_REG_SD_LPIB 0x04 -#define ICH6_REG_SD_CBL 0x08 -#define ICH6_REG_SD_LVI 0x0c -#define ICH6_REG_SD_FIFOW 0x0e -#define ICH6_REG_SD_FIFOSIZE 0x10 -#define ICH6_REG_SD_FORMAT 0x12 -#define ICH6_REG_SD_BDLPL 0x18 -#define ICH6_REG_SD_BDLPU 0x1c - -/* PCI space */ -#define ICH6_PCIREG_TCSEL 0x44 - -/* - * other constants - */ - -/* max number of SDs */ -/* ICH, ATI and VIA have 4 playback and 4 capture */ -#define ICH6_NUM_CAPTURE 4 -#define ICH6_NUM_PLAYBACK 4 - -/* ULI has 6 playback and 5 capture */ -#define ULI_NUM_CAPTURE 5 -#define ULI_NUM_PLAYBACK 6 - -/* ATI HDMI may have up to 8 playbacks and 0 capture */ -#define ATIHDMI_NUM_CAPTURE 0 -#define ATIHDMI_NUM_PLAYBACK 8 - -/* TERA has 4 playback and 3 capture */ -#define TERA_NUM_CAPTURE 3 -#define TERA_NUM_PLAYBACK 4 - -/* this number is statically defined for simplicity */ -#define MAX_AZX_DEV 16 - -/* max number of fragments - we may use more if allocating more pages for BDL */ -#define BDL_SIZE 4096 -#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) -#define AZX_MAX_FRAG 32 -/* max buffer size - no h/w limit, you can increase as you like */ -#define AZX_MAX_BUF_SIZE (1024*1024*1024) - -/* RIRB int mask: overrun[2], response[0] */ -#define RIRB_INT_RESPONSE 0x01 -#define RIRB_INT_OVERRUN 0x04 -#define RIRB_INT_MASK 0x05 - -/* STATESTS int mask: S3,SD2,SD1,SD0 */ -#define AZX_MAX_CODECS 8 -#define AZX_DEFAULT_CODECS 4 -#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1) - -/* SD_CTL bits */ -#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ -#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ -#define SD_CTL_STRIPE (3 << 16) /* stripe control */ -#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ -#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ -#define SD_CTL_STREAM_TAG_MASK (0xf << 20) -#define SD_CTL_STREAM_TAG_SHIFT 20 - -/* SD_CTL and SD_STS */ -#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ -#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ -#define SD_INT_COMPLETE 0x04 /* completion interrupt */ -#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ - SD_INT_COMPLETE) - -/* SD_STS */ -#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ - -/* INTCTL and INTSTS */ -#define ICH6_INT_ALL_STREAM 0xff /* all stream interrupts */ -#define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ -#define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ - -/* below are so far hardcoded - should read registers in future */ -#define ICH6_MAX_CORB_ENTRIES 256 -#define ICH6_MAX_RIRB_ENTRIES 256 - -/* position fix mode */ -enum { - POS_FIX_AUTO, - POS_FIX_LPIB, - POS_FIX_POSBUF, - POS_FIX_VIACOMBO, - POS_FIX_COMBO, -}; - -/* Defines for ATI HD Audio support in SB450 south bridge */ -#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 -#define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 - -/* Defines for Nvidia HDA support */ -#define NVIDIA_HDA_TRANSREG_ADDR 0x4e -#define NVIDIA_HDA_ENABLE_COHBITS 0x0f -#define NVIDIA_HDA_ISTRM_COH 0x4d -#define NVIDIA_HDA_OSTRM_COH 0x4c -#define NVIDIA_HDA_ENABLE_COHBIT 0x01 - -/* Defines for Intel SCH HDA snoop control */ -#define INTEL_SCH_HDA_DEVC 0x78 -#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11) - -/* Define IN stream 0 FIFO size offset in VIA controller */ -#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90 -/* Define VIA HD Audio Device ID*/ -#define VIA_HDAC_DEVICE_ID 0x3288 - -/* HD Audio class code */ -#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 - -/* - */ - -struct azx_dev { - struct snd_dma_buffer bdl; /* BDL buffer */ - u32 *posbuf; /* position buffer pointer */ - - unsigned int bufsize; /* size of the play buffer in bytes */ - unsigned int period_bytes; /* size of the period in bytes */ - unsigned int frags; /* number for period in the play buffer */ - unsigned int fifo_size; /* FIFO size */ - unsigned long start_wallclk; /* start + minimum wallclk */ - unsigned long period_wallclk; /* wallclk for period */ - - void __iomem *sd_addr; /* stream descriptor pointer */ - - u32 sd_int_sta_mask; /* stream int status mask */ - - /* pcm support */ - struct snd_pcm_substream *substream; /* assigned substream, - * set in PCM open - */ - unsigned int format_val; /* format value to be set in the - * controller and the codec - */ - unsigned char stream_tag; /* assigned stream */ - unsigned char index; /* stream index */ - int assigned_key; /* last device# key assigned to */ - - unsigned int opened :1; - unsigned int running :1; - unsigned int irq_pending :1; - unsigned int prepared:1; - unsigned int locked:1; - /* - * For VIA: - * A flag to ensure DMA position is 0 - * when link position is not greater than FIFO size - */ - unsigned int insufficient :1; - unsigned int wc_marked:1; - unsigned int no_period_wakeup:1; - - struct timecounter azx_tc; - struct cyclecounter azx_cc; - - int delay_negative_threshold; - -#ifdef CONFIG_SND_HDA_DSP_LOADER - struct mutex dsp_mutex; -#endif -};
/* DSP lock helpers */ #ifdef CONFIG_SND_HDA_DSP_LOADER @@ -445,116 +213,6 @@ struct azx_dev { #define dsp_is_locked(dev) 0 #endif
-/* CORB/RIRB */ -struct azx_rb { - u32 *buf; /* CORB/RIRB buffer - * Each CORB entry is 4byte, RIRB is 8byte - */ - dma_addr_t addr; /* physical address of CORB/RIRB buffer */ - /* for RIRB */ - unsigned short rp, wp; /* read/write pointers */ - int cmds[AZX_MAX_CODECS]; /* number of pending requests */ - u32 res[AZX_MAX_CODECS]; /* last read value */ -}; - -struct azx_pcm { - struct azx *chip; - struct snd_pcm *pcm; - struct hda_codec *codec; - struct hda_pcm_stream *hinfo[2]; - struct list_head list; -}; - -struct azx { - struct snd_card *card; - struct pci_dev *pci; - int dev_index; - - /* chip type specific */ - int driver_type; - unsigned int driver_caps; - int playback_streams; - int playback_index_offset; - int capture_streams; - int capture_index_offset; - int num_streams; - - /* pci resources */ - unsigned long addr; - void __iomem *remap_addr; - int irq; - - /* locks */ - spinlock_t reg_lock; - struct mutex open_mutex; - struct completion probe_wait; - - /* streams (x num_streams) */ - struct azx_dev *azx_dev; - - /* PCM */ - struct list_head pcm_list; /* azx_pcm list */ - - /* HD codec */ - unsigned short codec_mask; - int codec_probe_mask; /* copied from probe_mask option */ - struct hda_bus *bus; - unsigned int beep_mode; - - /* CORB/RIRB */ - struct azx_rb corb; - struct azx_rb rirb; - - /* CORB/RIRB and position buffers */ - struct snd_dma_buffer rb; - struct snd_dma_buffer posbuf; - -#ifdef CONFIG_SND_HDA_PATCH_LOADER - const struct firmware *fw; -#endif - - /* flags */ - int position_fix[2]; /* for both playback/capture streams */ - int poll_count; - unsigned int running :1; - unsigned int initialized :1; - unsigned int single_cmd :1; - unsigned int polling_mode :1; - unsigned int msi :1; - unsigned int irq_pending_warned :1; - unsigned int probing :1; /* codec probing phase */ - unsigned int snoop:1; - unsigned int align_buffer_size:1; - unsigned int region_requested:1; - - /* VGA-switcheroo setup */ - unsigned int use_vga_switcheroo:1; - unsigned int vga_switcheroo_registered:1; - unsigned int init_failed:1; /* delayed init failed */ - unsigned int disabled:1; /* disabled by VGA-switcher */ - - /* for debugging */ - unsigned int last_cmd[AZX_MAX_CODECS]; - - /* for pending irqs */ - struct work_struct irq_pending_work; - - struct work_struct probe_work; - - /* reboot notifier (for mysterious hangup problem at power-down) */ - struct notifier_block reboot_notifier; - - /* card list (for power_save trigger) */ - struct list_head list; - -#ifdef CONFIG_SND_HDA_DSP_LOADER - struct azx_dev saved_azx_dev; -#endif - - /* secondary power domain for hdmi audio under vga device */ - struct dev_pm_domain hdmi_pm_domain; -}; - #define CREATE_TRACE_POINTS #include "hda_intel_trace.h"
@@ -578,28 +236,6 @@ enum { AZX_NUM_DRIVERS, /* keep this as last entry */ };
-/* driver quirks (capabilities) */ -/* bits 0-7 are used for indicating driver type */ -#define AZX_DCAPS_NO_TCSEL (1 << 8) /* No Intel TCSEL bit */ -#define AZX_DCAPS_NO_MSI (1 << 9) /* No MSI support */ -#define AZX_DCAPS_ATI_SNOOP (1 << 10) /* ATI snoop enable */ -#define AZX_DCAPS_NVIDIA_SNOOP (1 << 11) /* Nvidia snoop enable */ -#define AZX_DCAPS_SCH_SNOOP (1 << 12) /* SCH/PCH snoop enable */ -#define AZX_DCAPS_RIRB_DELAY (1 << 13) /* Long delay in read loop */ -#define AZX_DCAPS_RIRB_PRE_DELAY (1 << 14) /* Put a delay before read */ -#define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */ -#define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */ -#define AZX_DCAPS_POSFIX_VIA (1 << 17) /* Use VIACOMBO as default */ -#define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */ -#define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */ -#define AZX_DCAPS_OLD_SSYNC (1 << 20) /* Old SSYNC reg for ICH */ -#define AZX_DCAPS_BUFSIZE (1 << 21) /* no buffer size alignment */ -#define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */ -#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */ -#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */ -#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ -#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 power well support */ - /* quirks for Intel PCH */ #define AZX_DCAPS_INTEL_PCH_NOPM \ (AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \ diff --git a/sound/pci/hda/hda_priv.h b/sound/pci/hda/hda_priv.h new file mode 100644 index 0000000..7656494 --- /dev/null +++ b/sound/pci/hda/hda_priv.h @@ -0,0 +1,398 @@ +/* + * Common defines for the alsa driver code base for HD Audio. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __SOUND_HDA_PRIV_H +#define __SOUND_HDA_PRIV_H + +#include <linux/clocksource.h> +#include <sound/core.h> +#include <sound/pcm.h> + +/* + * registers + */ +#define ICH6_REG_GCAP 0x00 +#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */ +#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */ +#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */ +#define ICH6_REG_VMIN 0x02 +#define ICH6_REG_VMAJ 0x03 +#define ICH6_REG_OUTPAY 0x04 +#define ICH6_REG_INPAY 0x06 +#define ICH6_REG_GCTL 0x08 +#define ICH6_GCTL_RESET (1 << 0) /* controller reset */ +#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */ +#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ +#define ICH6_REG_WAKEEN 0x0c +#define ICH6_REG_STATESTS 0x0e +#define ICH6_REG_GSTS 0x10 +#define ICH6_GSTS_FSTS (1 << 1) /* flush status */ +#define ICH6_REG_INTCTL 0x20 +#define ICH6_REG_INTSTS 0x24 +#define ICH6_REG_WALLCLK 0x30 /* 24Mhz source */ +#define ICH6_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ +#define ICH6_REG_SSYNC 0x38 +#define ICH6_REG_CORBLBASE 0x40 +#define ICH6_REG_CORBUBASE 0x44 +#define ICH6_REG_CORBWP 0x48 +#define ICH6_REG_CORBRP 0x4a +#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */ +#define ICH6_REG_CORBCTL 0x4c +#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ +#define ICH6_REG_CORBSTS 0x4d +#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */ +#define ICH6_REG_CORBSIZE 0x4e + +#define ICH6_REG_RIRBLBASE 0x50 +#define ICH6_REG_RIRBUBASE 0x54 +#define ICH6_REG_RIRBWP 0x58 +#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */ +#define ICH6_REG_RINTCNT 0x5a +#define ICH6_REG_RIRBCTL 0x5c +#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ +#define ICH6_REG_RIRBSTS 0x5d +#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */ +#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */ +#define ICH6_REG_RIRBSIZE 0x5e + +#define ICH6_REG_IC 0x60 +#define ICH6_REG_IR 0x64 +#define ICH6_REG_IRS 0x68 +#define ICH6_IRS_VALID (1<<1) +#define ICH6_IRS_BUSY (1<<0) + +#define ICH6_REG_DPLBASE 0x70 +#define ICH6_REG_DPUBASE 0x74 +#define ICH6_DPLBASE_ENABLE 0x1 /* Enable position buffer */ + +/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ +enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; + +/* stream register offsets from stream base */ +#define ICH6_REG_SD_CTL 0x00 +#define ICH6_REG_SD_STS 0x03 +#define ICH6_REG_SD_LPIB 0x04 +#define ICH6_REG_SD_CBL 0x08 +#define ICH6_REG_SD_LVI 0x0c +#define ICH6_REG_SD_FIFOW 0x0e +#define ICH6_REG_SD_FIFOSIZE 0x10 +#define ICH6_REG_SD_FORMAT 0x12 +#define ICH6_REG_SD_BDLPL 0x18 +#define ICH6_REG_SD_BDLPU 0x1c + +/* PCI space */ +#define ICH6_PCIREG_TCSEL 0x44 + +/* + * other constants + */ + +/* max number of SDs */ +/* ICH, ATI and VIA have 4 playback and 4 capture */ +#define ICH6_NUM_CAPTURE 4 +#define ICH6_NUM_PLAYBACK 4 + +/* ULI has 6 playback and 5 capture */ +#define ULI_NUM_CAPTURE 5 +#define ULI_NUM_PLAYBACK 6 + +/* ATI HDMI may have up to 8 playbacks and 0 capture */ +#define ATIHDMI_NUM_CAPTURE 0 +#define ATIHDMI_NUM_PLAYBACK 8 + +/* TERA has 4 playback and 3 capture */ +#define TERA_NUM_CAPTURE 3 +#define TERA_NUM_PLAYBACK 4 + +/* this number is statically defined for simplicity */ +#define MAX_AZX_DEV 16 + +/* max number of fragments - we may use more if allocating more pages for BDL */ +#define BDL_SIZE 4096 +#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) +#define AZX_MAX_FRAG 32 +/* max buffer size - no h/w limit, you can increase as you like */ +#define AZX_MAX_BUF_SIZE (1024*1024*1024) + +/* RIRB int mask: overrun[2], response[0] */ +#define RIRB_INT_RESPONSE 0x01 +#define RIRB_INT_OVERRUN 0x04 +#define RIRB_INT_MASK 0x05 + +/* STATESTS int mask: S3,SD2,SD1,SD0 */ +#define AZX_MAX_CODECS 8 +#define AZX_DEFAULT_CODECS 4 +#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1) + +/* SD_CTL bits */ +#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ +#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ +#define SD_CTL_STRIPE (3 << 16) /* stripe control */ +#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ +#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ +#define SD_CTL_STREAM_TAG_MASK (0xf << 20) +#define SD_CTL_STREAM_TAG_SHIFT 20 + +/* SD_CTL and SD_STS */ +#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ +#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ +#define SD_INT_COMPLETE 0x04 /* completion interrupt */ +#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ + SD_INT_COMPLETE) + +/* SD_STS */ +#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ + +/* INTCTL and INTSTS */ +#define ICH6_INT_ALL_STREAM 0xff /* all stream interrupts */ +#define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ +#define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ + +/* below are so far hardcoded - should read registers in future */ +#define ICH6_MAX_CORB_ENTRIES 256 +#define ICH6_MAX_RIRB_ENTRIES 256 + +/* driver quirks (capabilities) */ +/* bits 0-7 are used for indicating driver type */ +#define AZX_DCAPS_NO_TCSEL (1 << 8) /* No Intel TCSEL bit */ +#define AZX_DCAPS_NO_MSI (1 << 9) /* No MSI support */ +#define AZX_DCAPS_ATI_SNOOP (1 << 10) /* ATI snoop enable */ +#define AZX_DCAPS_NVIDIA_SNOOP (1 << 11) /* Nvidia snoop enable */ +#define AZX_DCAPS_SCH_SNOOP (1 << 12) /* SCH/PCH snoop enable */ +#define AZX_DCAPS_RIRB_DELAY (1 << 13) /* Long delay in read loop */ +#define AZX_DCAPS_RIRB_PRE_DELAY (1 << 14) /* Put a delay before read */ +#define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */ +#define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */ +#define AZX_DCAPS_POSFIX_VIA (1 << 17) /* Use VIACOMBO as default */ +#define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */ +#define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */ +#define AZX_DCAPS_OLD_SSYNC (1 << 20) /* Old SSYNC reg for ICH */ +#define AZX_DCAPS_BUFSIZE (1 << 21) /* no buffer size alignment */ +#define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */ +#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */ +#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */ +#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */ +#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */ + +/* position fix mode */ +enum { + POS_FIX_AUTO, + POS_FIX_LPIB, + POS_FIX_POSBUF, + POS_FIX_VIACOMBO, + POS_FIX_COMBO, +}; + +/* Defines for ATI HD Audio support in SB450 south bridge */ +#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42 +#define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02 + +/* Defines for Nvidia HDA support */ +#define NVIDIA_HDA_TRANSREG_ADDR 0x4e +#define NVIDIA_HDA_ENABLE_COHBITS 0x0f +#define NVIDIA_HDA_ISTRM_COH 0x4d +#define NVIDIA_HDA_OSTRM_COH 0x4c +#define NVIDIA_HDA_ENABLE_COHBIT 0x01 + +/* Defines for Intel SCH HDA snoop control */ +#define INTEL_SCH_HDA_DEVC 0x78 +#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11) + +/* Define IN stream 0 FIFO size offset in VIA controller */ +#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90 +/* Define VIA HD Audio Device ID*/ +#define VIA_HDAC_DEVICE_ID 0x3288 + +/* HD Audio class code */ +#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403 + +struct azx_dev { + struct snd_dma_buffer bdl; /* BDL buffer */ + u32 *posbuf; /* position buffer pointer */ + + unsigned int bufsize; /* size of the play buffer in bytes */ + unsigned int period_bytes; /* size of the period in bytes */ + unsigned int frags; /* number for period in the play buffer */ + unsigned int fifo_size; /* FIFO size */ + unsigned long start_wallclk; /* start + minimum wallclk */ + unsigned long period_wallclk; /* wallclk for period */ + + void __iomem *sd_addr; /* stream descriptor pointer */ + + u32 sd_int_sta_mask; /* stream int status mask */ + + /* pcm support */ + struct snd_pcm_substream *substream; /* assigned substream, + * set in PCM open + */ + unsigned int format_val; /* format value to be set in the + * controller and the codec + */ + unsigned char stream_tag; /* assigned stream */ + unsigned char index; /* stream index */ + int assigned_key; /* last device# key assigned to */ + + unsigned int opened:1; + unsigned int running:1; + unsigned int irq_pending:1; + unsigned int prepared:1; + unsigned int locked:1; + /* + * For VIA: + * A flag to ensure DMA position is 0 + * when link position is not greater than FIFO size + */ + unsigned int insufficient:1; + unsigned int wc_marked:1; + unsigned int no_period_wakeup:1; + + struct timecounter azx_tc; + struct cyclecounter azx_cc; + + int delay_negative_threshold; + +#ifdef CONFIG_SND_HDA_DSP_LOADER + /* Allows dsp load to have sole access to the playback stream. */ + struct mutex dsp_mutex; +#endif +}; + +/* CORB/RIRB */ +struct azx_rb { + u32 *buf; /* CORB/RIRB buffer + * Each CORB entry is 4byte, RIRB is 8byte + */ + dma_addr_t addr; /* physical address of CORB/RIRB buffer */ + /* for RIRB */ + unsigned short rp, wp; /* read/write pointers */ + int cmds[AZX_MAX_CODECS]; /* number of pending requests */ + u32 res[AZX_MAX_CODECS]; /* last read value */ +}; + +struct azx_pcm { + struct azx *chip; + struct snd_pcm *pcm; + struct hda_codec *codec; + struct hda_pcm_stream *hinfo[2]; + struct list_head list; +}; + +struct azx { + struct snd_card *card; + struct pci_dev *pci; + int dev_index; + + /* chip type specific */ + int driver_type; + unsigned int driver_caps; + int playback_streams; + int playback_index_offset; + int capture_streams; + int capture_index_offset; + int num_streams; + + /* pci resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; + + /* locks */ + spinlock_t reg_lock; + struct mutex open_mutex; /* Prevents concurrent open/close operations */ + struct completion probe_wait; + + /* streams (x num_streams) */ + struct azx_dev *azx_dev; + + /* PCM */ + struct list_head pcm_list; /* azx_pcm list */ + + /* HD codec */ + unsigned short codec_mask; + int codec_probe_mask; /* copied from probe_mask option */ + struct hda_bus *bus; + unsigned int beep_mode; + + /* CORB/RIRB */ + struct azx_rb corb; + struct azx_rb rirb; + + /* CORB/RIRB and position buffers */ + struct snd_dma_buffer rb; + struct snd_dma_buffer posbuf; + +#ifdef CONFIG_SND_HDA_PATCH_LOADER + const struct firmware *fw; +#endif + + /* flags */ + int position_fix[2]; /* for both playback/capture streams */ + int poll_count; + unsigned int running:1; + unsigned int initialized:1; + unsigned int single_cmd:1; + unsigned int polling_mode:1; + unsigned int msi:1; + unsigned int irq_pending_warned:1; + unsigned int probing:1; /* codec probing phase */ + unsigned int snoop:1; + unsigned int align_buffer_size:1; + unsigned int region_requested:1; + + /* VGA-switcheroo setup */ + unsigned int use_vga_switcheroo:1; + unsigned int vga_switcheroo_registered:1; + unsigned int init_failed:1; /* delayed init failed */ + unsigned int disabled:1; /* disabled by VGA-switcher */ + + /* for debugging */ + unsigned int last_cmd[AZX_MAX_CODECS]; + + /* for pending irqs */ + struct work_struct irq_pending_work; + + struct work_struct probe_work; + + /* reboot notifier (for mysterious hangup problem at power-down) */ + struct notifier_block reboot_notifier; + + /* card list (for power_save trigger) */ + struct list_head list; + +#ifdef CONFIG_SND_HDA_DSP_LOADER + struct azx_dev saved_azx_dev; +#endif + + /* secondary power domain for hdmi audio under vga device */ + struct dev_pm_domain hdmi_pm_domain; +}; + +#ifdef CONFIG_SND_VERBOSE_PRINTK +#define SFX /* nop */ +#else +#define SFX "hda-intel " +#endif + +#ifdef CONFIG_X86 +#define azx_snoop(chip) ((chip)->snoop) +#else +#define azx_snoop(chip) true +#endif + +#endif /* __SOUND_HDA_PRIV_H */