Hello Jaroslav.
I didn't have success getting the speakers to work with alsa-mixer. So, I ran alsa-info.sh as you suggested. This is the URL where the text file is located:
URL: http://alsa-project.org/db/?f=e1111847b82553f2dbd6015a36334f74b4402024http://www.alsa-project.org/db/?f=e1111847b82553f2dbd6015a36334f74b4402024
Thanks, Terry
________________________________ From: Terry Hummel Terry.Hummel@catalina.com Sent: Tuesday, September 5, 2023 10:08 AM To: Jaroslav Kysela perex@perex.cz; alsa-devel@alsa-project.org alsa-devel@alsa-project.org Cc: Dulani McLaurin Dulani.McLaurin@catalina.com Subject: Re: Bug Report: Audio issues with CentOS7
Ok. I'll give that a try. The CentOS7 image we have on these systems is minimal and the alsamixer module is not installed.
I'll get it loaded and run the tests you mentioned.
Thank you, Terry
________________________________ From: Jaroslav Kysela perex@perex.cz Sent: Tuesday, September 5, 2023 10:03 AM To: Terry Hummel Terry.Hummel@catalina.com; alsa-devel@alsa-project.org alsa-devel@alsa-project.org Cc: Dulani McLaurin Dulani.McLaurin@catalina.com Subject: Re: Bug Report: Audio issues with CentOS7
[You don't often get email from perex@perex.cz. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
On 05. 09. 23 15:51, Terry Hummel wrote:
Hi Jaroslav. Thank you very much for your input.
I created the alsa-beep.conf file in the /etc/modprobe.d/ folder and rebooted. When the system came up, I still couldn't get the speaker to make a sound via the beep command. I attached the .conf file just in case you wanted to confirm the contents.
Try to check mixer settings (Beep etc.) - e.g. `alsamixer -c 0` command.
If it does not help, run alsa-info.sh and show the URL with your dump.
Jaroslav
-- Jaroslav Kysela perex@perex.cz Linux Sound Maintainer; ALSA Project; Red Hat, Inc.