Since LoCoMo driver has been converted to provide proper gpiolib interface, make poodle ASoC platform driver use gpiolib API.
Signed-off-by: Dmitry Eremin-Solenikov dbaryshkov@gmail.com Acked-by: Mark Brown broonie@kernel.org --- sound/soc/pxa/poodle.c | 52 +++++++++++++++++++------------------------------- 1 file changed, 20 insertions(+), 32 deletions(-)
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 0fce8c4..c5b7c5e 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -20,15 +20,11 @@ #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/gpio/consumer.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h>
-#include <asm/mach-types.h> -#include <asm/hardware/locomo.h> -#include <mach/poodle.h> -#include <mach/audio.h> - #include "../codecs/wm8731.h" #include "pxa2xx-i2s.h"
@@ -42,22 +38,18 @@
static int poodle_jack_func; static int poodle_spk_func; +static struct gpio_desc *poodle_mute_l, *poodle_mute_r, *poodle_amp_on;
static void poodle_ext_control(struct snd_soc_dapm_context *dapm) { /* set up jack connection */ if (poodle_jack_func == POODLE_HP) { - /* set = unmute headphone */ - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 1); - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 1); + gpiod_set_value(poodle_mute_l, 0); + gpiod_set_value(poodle_mute_r, 0); snd_soc_dapm_enable_pin(dapm, "Headphone Jack"); } else { - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 0); - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 0); + gpiod_set_value(poodle_mute_l, 1); + gpiod_set_value(poodle_mute_r, 1); snd_soc_dapm_disable_pin(dapm, "Headphone Jack"); }
@@ -84,11 +76,8 @@ static int poodle_startup(struct snd_pcm_substream *substream) /* we need to unmute the HP at shutdown as the mute burns power on poodle */ static void poodle_shutdown(struct snd_pcm_substream *substream) { - /* set = unmute headphone */ - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 1); - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 1); + gpiod_set_value(poodle_mute_l, 0); + gpiod_set_value(poodle_mute_r, 0); }
static int poodle_hw_params(struct snd_pcm_substream *substream, @@ -178,12 +167,7 @@ static int poodle_set_spk(struct snd_kcontrol *kcontrol, static int poodle_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_AMP_ON, 0); - else - locomo_gpio_write(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_AMP_ON, 1); + gpiod_set_value(poodle_amp_on, (SND_SOC_DAPM_EVENT_ON(event)));
return 0; } @@ -268,13 +252,17 @@ static int poodle_probe(struct platform_device *pdev) struct snd_soc_card *card = &poodle; int ret;
- locomo_gpio_set_dir(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_AMP_ON, 0); - /* should we mute HP at startup - burning power ?*/ - locomo_gpio_set_dir(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_L, 0); - locomo_gpio_set_dir(&poodle_locomo_device.dev, - POODLE_LOCOMO_GPIO_MUTE_R, 0); + poodle_mute_l = devm_gpiod_get(&pdev->dev, "mute-l", GPIOD_OUT_HIGH); + if (IS_ERR(poodle_mute_l)) + return PTR_ERR(poodle_mute_l); + + poodle_mute_r = devm_gpiod_get(&pdev->dev, "mute-r", GPIOD_OUT_HIGH); + if (IS_ERR(poodle_mute_r)) + return PTR_ERR(poodle_mute_l); + + poodle_amp_on = devm_gpiod_get(&pdev->dev, "amp-on", GPIOD_OUT_LOW); + if (IS_ERR(poodle_amp_on)) + return PTR_ERR(poodle_amp_on);
card->dev = &pdev->dev;