OMAP McBSP FIFO is word structured: McBSP2 has 1024 + 256 = 1280 word long buffer, McBSP1,3,4,5 has 128 word long buffer
This means, that the size of the FIFO depends on the McBSP word size configuration. For example on McBSP3: 16bit samples: size is 128 * 2 = 256 bytes 32bit samples: size is 128 * 4 = 512 bytes It is simpler to place constraint for buffer and period based on channels. McBSP3 as example again (16 or 32 bit samples): 1 channel (mono): size is 128 frames (128 words) 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words) 4 channels: size is 128 / 4 = 32 frames (4 * 32 words)
Use the second method to place hw_rule on buffer size, and in threshold mode to period size.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com --- sound/soc/omap/omap-mcbsp.c | 98 +++++++++++++++++++++++++++++++++--------- 1 files changed, 77 insertions(+), 21 deletions(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index b06d8f1..d6ed761 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -173,6 +173,52 @@ static void omap_mcbsp_set_threshold(struct snd_pcm_substream *substream) omap_mcbsp_set_rx_threshold(mcbsp_data->bus_id, words); }
+static int hw_rule_bsize_by_channels(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_interval *bs = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_BUFFER_SIZE); + struct snd_interval *c = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + struct omap_mcbsp_data *mcbsp_data = rule->private; + struct snd_interval frames; + int size; + + snd_interval_any(&frames); + size = omap_mcbsp_get_fifo_size(mcbsp_data->bus_id); + + frames.min = size / c->min; + frames.integer = 1; + return snd_interval_refine(bs, &frames); + +} + +static int hw_rule_psize_by_channels(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct snd_interval *ps = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE); + struct snd_interval *c = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + struct snd_pcm_substream *substream = rule->private; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data); + struct snd_interval frames; + int size; + + snd_interval_any(&frames); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + size = omap_mcbsp_get_max_tx_threshold(mcbsp_data->bus_id); + else + size = omap_mcbsp_get_max_rx_threshold(mcbsp_data->bus_id); + + frames.min = 8; + frames.max = size / c->min; + frames.integer = 1; + return snd_interval_refine(ps, &frames); +} + static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -185,33 +231,43 @@ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream, if (!cpu_dai->active) err = omap_mcbsp_request(bus_id);
+ /* + * OMAP McBSP FIFO is word structured. + * McBSP2 has 1024 + 256 = 1280 word long buffer, + * McBSP1,3,4,5 has 128 word long buffer + * This means that the size of the FIFO depends on the sample format. + * For example on McBSP3: + * 16bit samples: size is 128 * 2 = 256 bytes + * 32bit samples: size is 128 * 4 = 512 bytes + * It is simpler to place constraint for buffer and period based on + * channels. + * McBSP3 as example again (16 or 32 bit samples): + * 1 channel (mono): size is 128 frames (128 words) + * 2 channels (stereo): size is 128 / 2 = 64 frames (2 * 64 words) + * 4 channels: size is 128 / 4 = 32 frames (4 * 32 words) + */ + + /* + * The first rule is for the buffer size, we should not allow smaller + * buffer than the FIFO size to avoid underruns + */ + snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, + hw_rule_bsize_by_channels, mcbsp_data, + SNDRV_PCM_HW_PARAM_BUFFER_SIZE, -1); + if (cpu_is_omap343x()) { int dma_op_mode = omap_mcbsp_get_dma_op_mode(bus_id); - int max_period;
/* - * McBSP2 in OMAP3 has 1024 * 32-bit internal audio buffer. - * Set constraint for minimum buffer size to the same than FIFO - * size in order to avoid underruns in playback startup because - * HW is keeping the DMA request active until FIFO is filled. + * In case os threshold mode, the rule will ensure, that the + * period size is not bigger than the maximum allowed threshold + * value. */ - if (bus_id == 1) - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_BUFFER_BYTES, - 4096, UINT_MAX); - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - max_period = omap_mcbsp_get_max_tx_threshold(bus_id); - else - max_period = omap_mcbsp_get_max_rx_threshold(bus_id); - - max_period++; - max_period <<= 1; - if (dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_PERIOD_BYTES, - 32, max_period); + snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_CHANNELS, + hw_rule_psize_by_channels, substream, + SNDRV_PCM_HW_PARAM_PERIOD_SIZE, -1); }
return err;