A radio station I'm working on has a machine with a Digigram VX222e connected to it.
According to the Digigram site and the ALSA website, the sound card is supported by ALSA. Unfortunately, it doesn't appear to be detected as a sound card. Reading online, it requires some firmware, but it appears that my system has the proper firmware installed.
The VX222e is a PCIe card, but it appears to be PCI on the card with a PCIe to PCI bridge. According to Digigram's support site, they made a hardware change in March of 2017, and I suspect that this might be the problem.
I'm guessing it might be as simple enough as an ID match that I need to add to a module, but I've never worked with the card before, and I'm a little stuck.
There's nothing regarding the card in dmesg, but it is visible in lspci:
03:00.0 PCI bridge: PLX Technology, Inc. PEX 8111 PCI Express-to-PCI Bridge (rev 21) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 NUMA node: 0 Bus: primary=03, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff [size=4K] Memory behind bridge: fde00000-fdefffff [size=1M] Prefetchable memory behind bridge: fdd00000-fddfffff [size=1M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) PCI-Express to PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- AttnBtn- AttnInd- PwrInd- RBE- SlotPowerLimit 25.000W DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Power Budgeting <?> Kernel modules: shpchp
04:04.0 Multimedia audio controller: PLX Technology, Inc. PCI9056 32-bit 66MHz PCI <-> IOBus Bridge Subsystem: Digigram Device ba41 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 3 NUMA node: 0 Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=512] Region 1: I/O ports at ec00 [size=256] Region 2: I/O ports at ef00 [size=128] Capabilities: [40] Power Management version 0 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] #00 [0000] Capabilities: [4c] Vital Product Data pcilib: sysfs_read_vpd: read failed: Input/output error
I'm also documenting what I've got and what I've tried here: https://vis.nu/blog/digigram_vx222e_isn_t_seen_in_arch_linux
Any pointers would be helpful. Thanks!
-Sam