On Tue, 06 Jun 2023 15:25:28 +0200, Yanteng Si wrote:
On loongson controller, RIRBSTS.RINTFL cannot be cleared, azx_interrupt() is called all the time. We disable RIRB interrupt, and use polling mode by default.
Signed-off-by: Yanteng Si siyanteng@loongson.cn Signed-off-by: Yingkun Meng mengyingkun@loongson.cn
include/sound/hdaudio.h | 1 + sound/hda/hdac_controller.c | 5 ++++- sound/pci/hda/hda_intel.c | 4 ++++ 3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/include/sound/hdaudio.h b/include/sound/hdaudio.h index 97f09acae302..a1dcc7f97d08 100644 --- a/include/sound/hdaudio.h +++ b/include/sound/hdaudio.h @@ -346,6 +346,7 @@ struct hdac_bus { bool reverse_assign:1; /* assign devices in reverse order */ bool corbrp_self_clear:1; /* CORBRP clears itself after reset */ bool polling_mode:1;
- bool no_intr_polling_mode:1;
It isn't clear enough what this flag does. It's basically prohibiting the RIRB IRQ (hence requiring the polling mode), right? Write it in the comment.
diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c index 3c7af6558249..705e09cc50ac 100644 --- a/sound/hda/hdac_controller.c +++ b/sound/hda/hdac_controller.c @@ -79,7 +79,10 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus) /* set N=1, get RIRB response interrupt for new entry */ snd_hdac_chip_writew(bus, RINTCNT, 1); /* enable rirb dma and response irq */
- snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
- if (bus->no_intr_polling_mode)
snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN);
- else
/* Accept unsolicited responses */ snd_hdac_chip_updatel(bus, GCTL, AZX_GCTL_UNSOL, AZX_GCTL_UNSOL); spin_unlock_irq(&bus->reg_lock);snd_hdac_chip_writeb(bus, RIRBCTL, AZX_RBCTL_DMA_EN | AZX_RBCTL_IRQ_EN);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 9c353dc7740c..1e8993836fc6 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1875,6 +1875,10 @@ static int azx_first_init(struct azx *chip) if (chip->driver_type == AZX_DRIVER_GFHDMI) bus->polling_mode = 1;
- if (chip->driver_type == AZX_DRIVER_LOONGSON) {
bus->no_intr_polling_mode = 1;
- }
Don't you need to set the bus->polling_mode?
thanks,
Takashi