From: Liam Girdwood liam.r.girdwood@linux.intel.com
Add support for Broadwell based machines with SST DSP audio.
Signed-off-by: Liam Girdwood liam.r.girdwood@linux.intel.com Signed-off-by: Jie Yang yang.jie@linux.intel.com --- sound/soc/intel/Kconfig | 12 +++ sound/soc/intel/Makefile | 2 + sound/soc/intel/broadwell.c | 251 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 265 insertions(+) create mode 100644 sound/soc/intel/broadwell.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index c30fedb..0b305f9 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -58,3 +58,15 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH help This adds audio driver for Intel Baytrail platform based boards with the MAX98090 audio codec. + +config SND_SOC_INTEL_BROADWELL_MACH + tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" + depends on SND_SOC_INTEL_SST && X86_INTEL_LPSS + select SND_SOC_INTEL_HASWELL + select SND_COMPRESS_OFFLOAD + select SND_SOC_RT286 + help + This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell + Ultrabook platforms. + Say Y if you have such a device + If unsure select "N". diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile index 4bfca79..7acbfc4 100644 --- a/sound/soc/intel/Makefile +++ b/sound/soc/intel/Makefile @@ -24,7 +24,9 @@ obj-$(CONFIG_SND_SOC_INTEL_BAYTRAIL) += snd-soc-sst-baytrail-pcm.o snd-soc-sst-haswell-objs := haswell.o snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o +snd-soc-sst-broadwell-objs := broadwell.o
obj-$(CONFIG_SND_SOC_INTEL_HASWELL_MACH) += snd-soc-sst-haswell.o obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o +obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o diff --git a/sound/soc/intel/broadwell.c b/sound/soc/intel/broadwell.c new file mode 100644 index 0000000..0e550f1 --- /dev/null +++ b/sound/soc/intel/broadwell.c @@ -0,0 +1,251 @@ +/* + * Intel Broadwell Wildcatpoint SST Audio + * + * Copyright (C) 2013, Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> + +#include "sst-dsp.h" +#include "sst-haswell-ipc.h" + +#include "../codecs/rt286.h" + +static const struct snd_soc_dapm_widget broadwell_widgets[] = { + SND_SOC_DAPM_HP("Headphones", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_MIC("Mic Jack", NULL), + SND_SOC_DAPM_MIC("DMIC1", NULL), + SND_SOC_DAPM_MIC("DMIC2", NULL), + SND_SOC_DAPM_LINE("Line Jack", NULL), +}; + +static const struct snd_soc_dapm_route broadwell_rt286_map[] = { + + /* speaker */ + {"Speaker", NULL, "SPOR"}, + {"Speaker", NULL, "SPOL"}, + + /* HP jack connectors - unknown if we have jack deteck */ + {"Headphones", NULL, "HPO Pin"}, + + /* other jacks */ + {"MIC1", NULL, "Mic Jack"}, + {"LINE1", NULL, "Line Jack"}, + + /* digital mics */ + {"DMIC1 Pin", NULL, "DMIC1"}, + {"DMIC2 Pin", NULL, "DMIC2"}, + + /* CODEC BE connections */ + {"SSP0 CODEC IN", NULL, "AIF1 Capture"}, + {"AIF1 Playback", NULL, "SSP0 CODEC OUT"}, +}; + +static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + /* The ADSP will covert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP0 to 16 bit */ + snd_mask_set(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT - + SNDRV_PCM_HW_PARAM_FIRST_MASK], + SNDRV_PCM_FORMAT_S16_LE); + return 0; +} + +static int broadwell_rt286_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, RT286_SCLK_S_PLL, 24000000, + SND_SOC_CLOCK_IN); + + if (ret < 0) { + dev_err(rtd->dev, "can't set codec sysclk configuration\n"); + return ret; + } + + return ret; +} + +static struct snd_soc_ops broadwell_rt286_ops = { + .hw_params = broadwell_rt286_hw_params, +}; + +static int broadwell_rtd_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + struct snd_soc_dapm_context *dapm = &codec->dapm; + struct sst_pdata *pdata = dev_get_platdata(rtd->platform->dev); + struct sst_hsw *broadwell = pdata->dsp; + int ret; + + /* Set ADSP SSP port settings */ + ret = sst_hsw_device_set_config(broadwell, SST_HSW_DEVICE_SSP_0, + SST_HSW_DEVICE_MCLK_FREQ_24_MHZ, + SST_HSW_DEVICE_CLOCK_MASTER, 9); + if (ret < 0) { + dev_err(rtd->dev, "error: failed to set device config\n"); + return ret; + } + + /* always connected - check HP for jack detect */ + snd_soc_dapm_enable_pin(dapm, "Headphones"); + snd_soc_dapm_enable_pin(dapm, "Speaker"); + snd_soc_dapm_enable_pin(dapm, "Mic Jack"); + snd_soc_dapm_enable_pin(dapm, "Line Jack"); + snd_soc_dapm_enable_pin(dapm, "DMIC1"); + snd_soc_dapm_enable_pin(dapm, "DMIC2"); + + return 0; +} + +/* broadwell digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link broadwell_rt286_dais[] = { + /* Front End DAI links */ + { + .name = "System PCM", + .stream_name = "System Playback", + .cpu_dai_name = "System Pin", + .platform_name = "haswell-pcm-audio", + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .init = broadwell_rtd_init, + .trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_playback = 1, + }, + { + .name = "Offload0", + .stream_name = "Offload0 Playback", + .cpu_dai_name = "Offload0 Pin", + .platform_name = "haswell-pcm-audio", + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_playback = 1, + }, + { + .name = "Offload1", + .stream_name = "Offload1 Playback", + .cpu_dai_name = "Offload1 Pin", + .platform_name = "haswell-pcm-audio", + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_playback = 1, + }, + { + .name = "Loopback PCM", + .stream_name = "Loopback", + .cpu_dai_name = "Loopback Pin", + .platform_name = "haswell-pcm-audio", + .dynamic = 0, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_capture = 1, + }, + { + .name = "Capture PCM", + .stream_name = "Capture", + .cpu_dai_name = "Capture Pin", + .platform_name = "haswell-pcm-audio", + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_capture = 1, + }, + + /* Back End DAI links */ + { + /* SSP0 - Codec */ + .name = "Codec", + .be_id = 0, + .cpu_dai_name = "snd-soc-dummy-dai", + .platform_name = "snd-soc-dummy", + .no_pcm = 1, + .codec_name = "i2c-INT343A:00", + .codec_dai_name = "rt286-aif1", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + .ignore_suspend = 1, + .ignore_pmdown_time = 1, + .be_hw_params_fixup = broadwell_ssp0_fixup, + .ops = &broadwell_rt286_ops, + .dpcm_playback = 1, + .dpcm_capture = 1, + }, +}; + +/* broadwell audio machine driver for WPT + RT286S */ +static struct snd_soc_card broadwell_rt286 = { + .name = "broadwell-rt286", + .owner = THIS_MODULE, + .dai_link = broadwell_rt286_dais, + .num_links = ARRAY_SIZE(broadwell_rt286_dais), + .dapm_widgets = broadwell_widgets, + .num_dapm_widgets = ARRAY_SIZE(broadwell_widgets), + .dapm_routes = broadwell_rt286_map, + .num_dapm_routes = ARRAY_SIZE(broadwell_rt286_map), + .fully_routed = true, +}; + +static int broadwell_audio_probe(struct platform_device *pdev) +{ + broadwell_rt286.dev = &pdev->dev; + + return snd_soc_register_card(&broadwell_rt286); +} + +static int broadwell_audio_remove(struct platform_device *pdev) +{ + snd_soc_unregister_card(&broadwell_rt286); + return 0; +} + +static struct platform_driver broadwell_audio = { + .probe = broadwell_audio_probe, + .remove = broadwell_audio_remove, + .driver = { + .name = "broadwell-audio", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(broadwell_audio) + +/* Module information */ +MODULE_AUTHOR("Liam Girdwood, Xingchao Wang"); +MODULE_DESCRIPTION("Intel SST Audio for WPT/Broadwell"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:broadwell-audio");