Hello,
On 09/07/2018 16:29:43+0300, Codrin Ciubotariu wrote:
On 06.07.2018 22:39, Alexandre Belloni wrote:
Hi Codrin,
On 18/06/2018 17:12:38+0300, Codrin Ciubotariu wrote:
From: Cyrille Pitchen cyrille.pitchen@atmel.com
This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for each I2S node.
Signed-off-by: Cyrille Pitchen cyrille.pitchen@atmel.com [codrin.ciubotariu@microchip.com: added phandle to new mux clock] Signed-off-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com
The bindings for the I2S node are applied to broonie/sound.git .
Changes in v5:
- the previous name was: [PATCH v4 6/7] ARM: dts: at91: sama5d2: add nodes for I2S controllers
arch/arm/boot/dts/sama5d2.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index eeb6afa1cda7..eca73ce40bc5 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -58,6 +58,8 @@ serial1 = &uart3; tcb0 = &tcb0; tcb1 = &tcb1;
i2s0 = &i2s0;i2s1 = &i2s1;@@ -1313,6 +1315,22 @@ clocks = <&clk32k>; };
i2s0: i2s@f8050000 {compatible = "atmel,sama5d2-i2s";reg = <0xf8050000 0x100>;interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;dmas = <&dma0(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |AT91_XDMAC_DT_PERID(31))>,<&dma0(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |AT91_XDMAC_DT_PERID(32))>;dma-names = "tx", "rx";clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;clock-names = "pclk", "gclk", "aclk", "muxclk";status = "disabled";};Can you resend the DTS patches after removing the unnecessary clocks?
I will. Should I also make the "muxclk" clock an assigned clock to assign its parent ?
It would be better if that allows to remove the corresponding code in the driver.