We can no longer rely on the return value of devm_snd_dmaengine_pcm_register(...) to check if the DMA handle is declared in the DT.
Previously this check activated PIO mode but currently dma_request_chan returns either a valid channel or -EPROBE_DEFER.
In order to activate PIO mode check instead if the interrupt line is declared. This reflects better what is documented in the DT bindings (see Documentation/devicetree/bindings/sound/ designware-i2s.txt).
Also, initialize use_pio variable which was never being set causing PIO mode to never work.
Signed-off-by: Jose Abreu joabreu@synopsys.com Cc: Carlos Palminha palminha@synopsys.com Cc: Liam Girdwood lgirdwood@gmail.com Cc: Mark Brown broonie@kernel.org Cc: Jaroslav Kysela perex@perex.cz Cc: Takashi Iwai tiwai@suse.com Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org --- sound/soc/dwc/designware_i2s.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c index 2998954..bdf8398 100644 --- a/sound/soc/dwc/designware_i2s.c +++ b/sound/soc/dwc/designware_i2s.c @@ -681,22 +681,19 @@ static int dw_i2s_probe(struct platform_device *pdev) }
if (!pdata) { - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret == -EPROBE_DEFER) { - dev_err(&pdev->dev, - "failed to register PCM, deferring probe\n"); - return ret; - } else if (ret) { - dev_err(&pdev->dev, - "Could not register DMA PCM: %d\n" - "falling back to PIO mode\n", ret); + if (irq >= 0) { ret = dw_pcm_register(pdev); - if (ret) { - dev_err(&pdev->dev, - "Could not register PIO PCM: %d\n", + dev->use_pio = true; + } else { + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, + 0); + dev->use_pio = false; + } + + if (ret) { + dev_err(&pdev->dev, "could not register pcm: %d\n", ret); - goto err_clk_disable; - } + goto err_clk_disable; } }