From: Pan Xiuli xiuli.pan@linux.intel.com
The old STOP sequence is: 1. stop DMA 2. send STOP ipc If delay happen before the steps 1 and 2, the DMA buffer will be empty in short time and cause pipeline xrun then stop the pipeline. Then the step 2 ipc stop will return error as pipeline is already stopped.
Suggested change to avoid the issue is to switch the order of steps 1 and 2 for the stop sequence.
Signed-off-by: Pan Xiuli xiuli.pan@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/sof/pcm.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c index fa7769dd825c..2b876d497447 100644 --- a/sound/soc/sof/pcm.c +++ b/sound/soc/sof/pcm.c @@ -323,6 +323,7 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd) struct sof_ipc_stream stream; struct sof_ipc_reply reply; bool reset_hw_params = false; + bool ipc_first = false; int ret;
/* nothing to do for BE */ @@ -343,6 +344,7 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd) switch (cmd) { case SNDRV_PCM_TRIGGER_PAUSE_PUSH: stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_PAUSE; + ipc_first = true; break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_RELEASE; @@ -363,6 +365,7 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_STOP; + ipc_first = true; reset_hw_params = true; break; default: @@ -370,12 +373,22 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd) return -EINVAL; }
- snd_sof_pcm_platform_trigger(sdev, substream, cmd); + /* + * DMA and IPC sequence is different for start and stop. Need to send + * STOP IPC before stop DMA + */ + if (!ipc_first) + snd_sof_pcm_platform_trigger(sdev, substream, cmd);
/* send IPC to the DSP */ ret = sof_ipc_tx_message(sdev->ipc, stream.hdr.cmd, &stream, sizeof(stream), &reply, sizeof(reply));
+ /* need to STOP DMA even if STOP IPC failed */ + if (ipc_first) + snd_sof_pcm_platform_trigger(sdev, substream, cmd); + + /* free PCM if reset_hw_params is set and the STOP IPC is successful */ if (!ret && reset_hw_params) ret = sof_pcm_dsp_pcm_free(substream, sdev, spcm);