The hw_params() overwrites i2s_net settings for special cases like mono-channel support, however, it doesn't update ssi->i2s_net as set_dai_fmt() does.
This patch removes the local i2s_net variable and directly updates ssi->i2s_net in the hw_params() so that the driver can simply look up the ssi->i2s_net instead of reading the register.
Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com Tested-by: Caleb Crome caleb@crome.org --- sound/soc/fsl/fsl_ssi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 001e453..9847a1d 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -838,16 +838,16 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, }
if (!fsl_ssi_is_ac97(ssi)) { - u8 i2s_net; /* Normal + Network mode to send 16-bit data in 32-bit frames */ if (fsl_ssi_is_i2s_cbm_cfs(ssi) && sample_size == 16) - i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET; - else - i2s_net = ssi->i2s_net; + ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL | SSI_SCR_NET; + + /* Use Normal mode to send mono data at 1st slot of 2 slots */ + if (channels == 1) + ssi->i2s_net = SSI_SCR_I2S_MODE_NORMAL;
regmap_update_bits(regs, REG_SSI_SCR, - SSI_SCR_I2S_NET_MASK, - channels == 1 ? 0 : i2s_net); + SSI_SCR_I2S_NET_MASK, ssi->i2s_net); }
/* In synchronous mode, the SSI uses STCCR for capture */