Old locomolcd driver is now completely obsolete by new locomo_bl and locomo_lcd drivers, so let's drop it.
Signed-off-by: Dmitry Eremin-Solenikov dbaryshkov@gmail.com --- drivers/video/backlight/locomolcd.c | 255 ------------------------------------ 1 file changed, 255 deletions(-) delete mode 100644 drivers/video/backlight/locomolcd.c
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c deleted file mode 100644 index 6c3ec42..0000000 --- a/drivers/video/backlight/locomolcd.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Backlight control code for Sharp Zaurus SL-5500 - * - * Copyright 2005 John Lenz lenz@cs.wisc.edu - * Maintainer: Pavel Machek pavel@ucw.cz (unless John wants to :-) - * GPL v2 - * - * This driver assumes single CPU. That's okay, because collie is - * slightly old hardware, and no one is going to retrofit second CPU to - * old PDA. - */ - -/* LCD power functions */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/backlight.h> - -#include <asm/hardware/locomo.h> -#include <asm/irq.h> -#include <asm/mach/sharpsl_param.h> -#include <asm/mach-types.h> - -#include "../../../arch/arm/mach-sa1100/generic.h" - -static struct backlight_device *locomolcd_bl_device; -static struct locomo_dev *locomolcd_dev; -static unsigned long locomolcd_flags; -#define LOCOMOLCD_SUSPENDED 0x01 - -static void locomolcd_on(int comadj) -{ - locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0); - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1); - mdelay(2); - - locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0); - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1); - mdelay(2); - - locomo_m62332_senddata(locomolcd_dev, comadj, 0); - mdelay(5); - - locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0); - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1); - mdelay(10); - - /* TFTCRST | CPSOUT=0 | CPSEN */ - locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC); - - /* Set CPSD */ - locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD); - - /* TFTCRST | CPSOUT=0 | CPSEN */ - locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC); - mdelay(10); - - locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0); - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1); -} - -static void locomolcd_off(int comadj) -{ - /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */ - locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC); - mdelay(1); - - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0); - mdelay(110); - - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0); - mdelay(700); - - /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */ - locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC); - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0); - locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0); -} - -void locomolcd_power(int on) -{ - int comadj = sharpsl_param.comadj; - unsigned long flags; - - local_irq_save(flags); - - if (!locomolcd_dev) { - local_irq_restore(flags); - return; - } - - /* read comadj */ - if (comadj == -1 && machine_is_collie()) - comadj = 128; - if (comadj == -1 && machine_is_poodle()) - comadj = 118; - - if (on) - locomolcd_on(comadj); - else - locomolcd_off(comadj); - - local_irq_restore(flags); -} -EXPORT_SYMBOL(locomolcd_power); - -static int current_intensity; - -static int locomolcd_set_intensity(struct backlight_device *bd) -{ - int intensity = bd->props.brightness; - - if (bd->props.power != FB_BLANK_UNBLANK) - intensity = 0; - if (bd->props.fb_blank != FB_BLANK_UNBLANK) - intensity = 0; - if (locomolcd_flags & LOCOMOLCD_SUSPENDED) - intensity = 0; - - switch (intensity) { - /* - * AC and non-AC are handled differently, - * but produce same results in sharp code? - */ - case 0: - locomo_frontlight_set(locomolcd_dev, 0, 0, 161); - break; - case 1: - locomo_frontlight_set(locomolcd_dev, 117, 0, 161); - break; - case 2: - locomo_frontlight_set(locomolcd_dev, 163, 0, 148); - break; - case 3: - locomo_frontlight_set(locomolcd_dev, 194, 0, 161); - break; - case 4: - locomo_frontlight_set(locomolcd_dev, 194, 1, 161); - break; - default: - return -ENODEV; - } - current_intensity = intensity; - return 0; -} - -static int locomolcd_get_intensity(struct backlight_device *bd) -{ - return current_intensity; -} - -static const struct backlight_ops locomobl_data = { - .get_brightness = locomolcd_get_intensity, - .update_status = locomolcd_set_intensity, -}; - -#ifdef CONFIG_PM_SLEEP -static int locomolcd_suspend(struct device *dev) -{ - locomolcd_flags |= LOCOMOLCD_SUSPENDED; - locomolcd_set_intensity(locomolcd_bl_device); - return 0; -} - -static int locomolcd_resume(struct device *dev) -{ - locomolcd_flags &= ~LOCOMOLCD_SUSPENDED; - locomolcd_set_intensity(locomolcd_bl_device); - return 0; -} -#endif - -static SIMPLE_DEV_PM_OPS(locomolcd_pm_ops, locomolcd_suspend, locomolcd_resume); - -static int locomolcd_probe(struct locomo_dev *ldev) -{ - struct backlight_properties props; - unsigned long flags; - - local_irq_save(flags); - locomolcd_dev = ldev; - - locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0); - - /* - * the poodle_lcd_power function is called for the first time - * from fs_initcall, which is before locomo is activated. - * We need to recall poodle_lcd_power here - */ - if (machine_is_poodle()) - locomolcd_power(1); - - local_irq_restore(flags); - - memset(&props, 0, sizeof(struct backlight_properties)); - props.type = BACKLIGHT_RAW; - props.max_brightness = 4; - locomolcd_bl_device = backlight_device_register("locomo-bl", - &ldev->dev, NULL, - &locomobl_data, &props); - - if (IS_ERR(locomolcd_bl_device)) - return PTR_ERR(locomolcd_bl_device); - - /* Set up frontlight so that screen is readable */ - locomolcd_bl_device->props.brightness = 2; - locomolcd_set_intensity(locomolcd_bl_device); - - return 0; -} - -static int locomolcd_remove(struct locomo_dev *dev) -{ - unsigned long flags; - - locomolcd_bl_device->props.brightness = 0; - locomolcd_bl_device->props.power = 0; - locomolcd_set_intensity(locomolcd_bl_device); - - backlight_device_unregister(locomolcd_bl_device); - local_irq_save(flags); - locomolcd_dev = NULL; - local_irq_restore(flags); - return 0; -} - -static struct locomo_driver poodle_lcd_driver = { - .drv = { - .name = "locomo-backlight", - .pm = &locomolcd_pm_ops, - }, - .devid = LOCOMO_DEVID_BACKLIGHT, - .probe = locomolcd_probe, - .remove = locomolcd_remove, -}; - -static int __init locomolcd_init(void) -{ - return locomo_driver_register(&poodle_lcd_driver); -} - -static void __exit locomolcd_exit(void) -{ - locomo_driver_unregister(&poodle_lcd_driver); -} - -module_init(locomolcd_init); -module_exit(locomolcd_exit); - -MODULE_AUTHOR("John Lenz lenz@cs.wisc.edu, Pavel Machek pavel@ucw.cz"); -MODULE_DESCRIPTION("Collie LCD driver"); -MODULE_LICENSE("GPL");