The max98090 driver defines 3 DAPM muxes; one for the right line output (LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux) and one for the right headphone mixer source (MIXHPRSEL Mux). The same bit is used for the mux as well as the DAPM enable, and although the mux can be correctly configured, after playback has completed, the mux will be reset during the disable phase. This is preventing the state of these muxes from being saved and restored correctly on system reboot. Fix this by marking these muxes as SND_SOC_NOPM.
Note this has been verified this on the Tegra124 Nyan Big which features the MAX98090 codec.
Signed-off-by: Jon Hunter jonathanh@nvidia.com --- If this is the correct fix for this issue, can we tag this for stable? Or I can re-send with the stable tag. However, wanted to send out for review first.
sound/soc/codecs/max98090.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index 30c242c38d99..7619ea31ab50 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -1194,14 +1194,14 @@ static const struct snd_soc_dapm_widget max98090_dapm_widgets[] = { &max98090_right_rcv_mixer_controls[0], ARRAY_SIZE(max98090_right_rcv_mixer_controls)),
- SND_SOC_DAPM_MUX("LINMOD Mux", M98090_REG_LOUTR_MIXER, - M98090_LINMOD_SHIFT, 0, &max98090_linmod_mux), + SND_SOC_DAPM_MUX("LINMOD Mux", SND_SOC_NOPM, 0, 0, + &max98090_linmod_mux),
- SND_SOC_DAPM_MUX("MIXHPLSEL Mux", M98090_REG_HP_CONTROL, - M98090_MIXHPLSEL_SHIFT, 0, &max98090_mixhplsel_mux), + SND_SOC_DAPM_MUX("MIXHPLSEL Mux", SND_SOC_NOPM, 0, 0, + &max98090_mixhplsel_mux),
- SND_SOC_DAPM_MUX("MIXHPRSEL Mux", M98090_REG_HP_CONTROL, - M98090_MIXHPRSEL_SHIFT, 0, &max98090_mixhprsel_mux), + SND_SOC_DAPM_MUX("MIXHPRSEL Mux", SND_SOC_NOPM, 0, 0, + &max98090_mixhprsel_mux),
SND_SOC_DAPM_PGA("HP Left Out", M98090_REG_OUTPUT_ENABLE, M98090_HPLEN_SHIFT, 0, NULL, 0),