From: Krzysztof Helt krzysztof.h1@wp.pl
Add module parameter to enable or disable joystick port (gameport) on the SC6600 and later cards.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- sound/isa/sc6000.c | 9 +++++++-- 1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c index c803b2e..7e2526a 100644 --- a/sound/isa/sc6000.c +++ b/sound/isa/sc6000.c @@ -56,6 +56,7 @@ static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x300, 0x310, 0x320, 0x330 */ static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5, 7, 9, 10, 0 */ static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0, 1, 3 */ +static int joystick[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = 0 };
module_param_array(index, int, NULL, 0444); MODULE_PARM_DESC(index, "Index value for sc-6000 based soundcard."); @@ -75,6 +76,8 @@ module_param_array(mpu_irq, int, NULL, 0444); MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for sc-6000 driver."); module_param_array(dma, int, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for sc-6000 driver."); +module_param_array(joystick, int, NULL, 0444); +MODULE_PARM_DESC(dma, "Enable gameport.");
/* * Commands of SC6000's DSP (SBPRO+special). @@ -363,7 +366,7 @@ static int __devinit sc6000_init_mss(char __iomem *vport, int config,
static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg, long xport, long xmpu, - long xmss_port) + long xmss_port, int joystick) { cfg[0] = 0; cfg[1] = 0; @@ -376,6 +379,8 @@ static void __devinit sc6000_hw_cfg_encode(char __iomem *vport, int *cfg, if (xmss_port == 0xe80) cfg[0] |= 0x10; cfg[0] |= 0x40; /* always set */ + if (!joystick) + cfg[0] |= 0x02; cfg[1] |= 0x80; /* enable WSS system */ cfg[1] &= ~0x40; /* disable IDE */ snd_printd("hw cfg %x, %x\n", cfg[0], cfg[1]); @@ -427,7 +432,7 @@ static int __devinit sc6000_init_board(char __iomem *vport, if (!old) { int cfg[2]; sc6000_hw_cfg_encode(vport, &cfg[0], port[dev], mpu_port[dev], - mss_port[dev]); + mss_port[dev], joystick[dev]); if (sc6000_hw_cfg_write(vport, cfg) < 0) { snd_printk(KERN_ERR "sc6000_hw_cfg_write: failed!\n"); return -EIO;