On Fri, May 15, 2009 at 08:34:06PM +0100, Ben Dooks wrote:
Is there a standard method for binding an AMP to an driver, or is it necessary to have the AMPs in the driver itself? If not, what would people recommend to be the best example of this?
There's several drivers involved in an ASoC system - these things are generally handled in the machine driver.
For power control for things like amplifiers this is done by providing an event callback for one of the widgets for an output (eg, a SND_SOC_DAPM_SPK()) and doing whatever is required to enable or disalbe the device (usually updating a GPIO) in the callback. This ensures that the power control is integrated with DAPM power sequencing. See the Mic Jack handling in spitz.c for a mainline example of this.
For non-power control (eg, a mute controlled by a GPIO) a regular control would be registered by the machine driver - the _EXT() controls ASoC provides are designed for use here, allowing callbacks to be registered to update GPIOs or do whatever other changes are required. Of course, it's also possible to register normal ALSA controls as normal without any ASoC specific stuff if desired. Spitz also has some examples of this.
I'm not sure if that answers your question?