This patch adds codec node for TI TAS571x on UniPhier LD11/20 global boards. And adds settings of AIO for speaker out.
Signed-off-by: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com --- .../boot/dts/socionext/uniphier-ld11-global.dts | 20 ++++++++++++++++++++ .../boot/dts/socionext/uniphier-ld20-global.dts | 20 ++++++++++++++++++++ 2 files changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 4eb8d00a8c02..ca09251a3eab 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -10,6 +10,7 @@
/dts-v1/; #include "uniphier-ld11.dtsi" +#include "dt-bindings/gpio/uniphier-gpio.h"
/ { model = "UniPhier LD11 Global Board (REF_LD11_GP)"; @@ -45,6 +46,7 @@ widgets = "Headphone", "Headphone Jack";
dais = <&i2s_port2 + &i2s_port3 &i2s_port4 &spdif_port0>; }; @@ -73,6 +75,20 @@ &i2c0 { status = "okay";
+ tas5707a@1d { + compatible = "ti,tas5711"; + reg = <0x1d>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + + port@0 { + tas_speaker: endpoint { + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; + eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; @@ -109,17 +125,21 @@
i2s_port2: port@2 { i2s_line: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_line>; }; };
i2s_port3: port@3 { i2s_hpcmout1: endpoint { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; }; };
i2s_port4: port@4 { i2s_pcmout3: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_hp>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index ebcd65631bca..0728832ce552 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -10,6 +10,7 @@
/dts-v1/; #include "uniphier-ld20.dtsi" +#include "dt-bindings/gpio/uniphier-gpio.h"
/ { model = "UniPhier LD20 Global Board (REF_LD20_GP)"; @@ -45,6 +46,7 @@ widgets = "Headphone", "Headphone Jack";
dais = <&i2s_port2 + &i2s_port3 &i2s_port4 &spdif_port0>; }; @@ -72,6 +74,20 @@
&i2c0 { status = "okay"; + + tas5707@1b { + compatible = "ti,tas5711"; + reg = <0x1b>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + + port@0 { + tas_speaker: endpoint { + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; };
&nand { @@ -91,17 +107,21 @@
i2s_port2: port@2 { i2s_line: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_line>; }; };
i2s_port3: port@3 { i2s_hpcmout1: endpoint { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; }; };
i2s_port4: port@4 { i2s_pcmout3: endpoint { + dai-format = "i2s"; remote-endpoint = <&evea_hp>; }; };