On Fri, Jan 29, 2021 at 11:57:38PM +0530, Sameer Pujar wrote:
Update following in rt5659.txt binding doc
Add JD source for Intel HDA header: Commit 041e74b71491 ("ASoC: rt5659: Add the support of Intel HDA Header") added driver support. Add missing info here.
sound-name-prefix: Used to prefix component widgets/kcontrols with given prefix.
ports: Helps to use the Codec with audio graph card
Signed-off-by: Sameer Pujar spujar@nvidia.com Reported-by: Jon Hunter jonathanh@nvidia.com Cc: Oder Chiou oder_chiou@realtek.com Cc: Bard Liao bardliao@realtek.com
Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt index 56788f5..c473df5 100644 --- a/Documentation/devicetree/bindings/sound/rt5659.txt +++ b/Documentation/devicetree/bindings/sound/rt5659.txt @@ -37,10 +37,21 @@ Optional properties:
- realtek,jd-src 0: No JD is used 1: using JD3 as JD source
- 2: JD source for Intel HDA header
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+- sound-name-prefix: Please refer to name-prefix.txt
+- ports: A Codec may have a single or multiple I2S interfaces. These
- interfaces on Codec side can be described under 'ports' or 'port'.
- When the SoC or host device is connected to multiple interfaces of
- the Codec, the connectivity can be described using 'ports' property.
- If a single interface is used, then 'port' can be used. The usage
- depends on the platform or board design.
- Please refer to Documentation/devicetree/bindings/graph.txt
Please read what that file says now.
Pins on the device (for linking into audio routes) for RT5659/RT5658:
- DMIC L1
-- 2.7.4