Allwinner H5 is a SoC that features a CCU like H3, but with MMC phase clocks removed (for new MMC controller) and a new bus gate/reset imported.
Add support for it.
Signed-off-by: Icenowy Zheng icenowy@aosc.xyz --- A giant rewrite since v1. It now do not use a dedicated driver for H5, but altered the CCU driver of H3 to support H5.
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 + drivers/clk/sunxi-ng/Kconfig | 6 +- drivers/clk/sunxi-ng/Makefile | 2 +- .../sunxi-ng/{ccu-sun8i-h3.c => ccu-sunxi-h3-h5.c} | 179 ++++++++++++++++++--- .../sunxi-ng/{ccu-sun8i-h3.h => ccu-sunxi-h3-h5.h} | 15 +- include/dt-bindings/clock/sun8i-h3-ccu.h | 146 +---------------- include/dt-bindings/clock/sunxi-h3-h5-ccu.h | 148 +++++++++++++++++ include/dt-bindings/reset/sun8i-h3-ccu.h | 104 +----------- include/dt-bindings/reset/sunxi-h3-h5-ccu.h | 106 ++++++++++++ 9 files changed, 431 insertions(+), 276 deletions(-) rename drivers/clk/sunxi-ng/{ccu-sun8i-h3.c => ccu-sunxi-h3-h5.c} (80%) rename drivers/clk/sunxi-ng/{ccu-sun8i-h3.h => ccu-sunxi-h3-h5.h} (82%) mode change 100644 => 120000 include/dt-bindings/clock/sun8i-h3-ccu.h create mode 100644 include/dt-bindings/clock/sunxi-h3-h5-ccu.h mode change 100644 => 120000 include/dt-bindings/reset/sun8i-h3-ccu.h create mode 100644 include/dt-bindings/reset/sunxi-h3-h5-ccu.h
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index f6032cf63f12..a33a4a5ecffa 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -9,6 +9,7 @@ Required properties : - "allwinner,sun8i-h3-ccu" - "allwinner,sun8i-v3s-ccu" - "allwinner,sun50i-a64-ccu" + - "allwinner,sun50i-h5-ccu"
- reg: Must contain the registers base address and length - clocks: phandle to the oscillators feeding the CCU. Two are needed: diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index 71f11cd1647b..bdf18e846731 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -108,8 +108,8 @@ config SUN8I_A33_CCU select SUNXI_CCU_PHASE default MACH_SUN8I
-config SUN8I_H3_CCU - bool "Support for the Allwinner H3 CCU" +config SUNXI_H3_H5_CCU + bool "Support for the Allwinner H3/H5 CCU" select SUNXI_CCU_DIV select SUNXI_CCU_NK select SUNXI_CCU_NKM @@ -117,7 +117,7 @@ config SUN8I_H3_CCU select SUNXI_CCU_NM select SUNXI_CCU_MP select SUNXI_CCU_PHASE - default MACH_SUN8I + default MACH_SUN8I || (ARM64 && ARCH_SUNXI)
config SUN8I_V3S_CCU bool "Support for the Allwinner V3s CCU" diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index a8afdf9c7668..cdc3359abbfe 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -23,5 +23,5 @@ obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o obj-$(CONFIG_SUN6I_A31_CCU) += ccu-sun6i-a31.o obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o -obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o +obj-$(CONFIG_SUNXI_H3_H5_CCU) += ccu-sunxi-h3-h5.o obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c similarity index 80% rename from drivers/clk/sunxi-ng/ccu-sun8i-h3.c rename to drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c index a26c8a19fe93..b7b9f85f5c9f 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c +++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c @@ -27,7 +27,7 @@ #include "ccu_nm.h" #include "ccu_phase.h"
-#include "ccu-sun8i-h3.h" +#include "ccu-sunxi-h3-h5.h"
static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux", "osc24M", 0x000, @@ -47,7 +47,7 @@ static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux", * We don't have any need for the variable divider for now, so we just * hardcode it to match with the clock names */ -#define SUN8I_H3_PLL_AUDIO_REG 0x008 +#define SUNXI_H3_H5_PLL_AUDIO_REG 0x008
static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base", "osc24M", 0x008, @@ -300,8 +300,10 @@ static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x06c, BIT(18), 0); static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x06c, BIT(19), 0); -static SUNXI_CCU_GATE(bus_scr_clk, "bus-scr", "apb2", +static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2", 0x06c, BIT(20), 0); +static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2", + 0x06c, BIT(21), 0);
static SUNXI_CCU_GATE(bus_ephy_clk, "bus-ephy", "ahb1", 0x070, BIT(0), 0); @@ -484,7 +486,7 @@ static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu", 0x1a0, 0, 3, BIT(31), 0);
-static struct ccu_common *sun8i_h3_ccu_clks[] = { +static struct ccu_common *sunxi_h3_h5_ccu_clks[] = { &pll_cpux_clk.common, &pll_audio_base_clk.common, &pll_video_clk.common, @@ -546,7 +548,8 @@ static struct ccu_common *sun8i_h3_ccu_clks[] = { &bus_uart1_clk.common, &bus_uart2_clk.common, &bus_uart3_clk.common, - &bus_scr_clk.common, + &bus_scr0_clk.common, + &bus_scr1_clk.common, &bus_ephy_clk.common, &bus_dbg_clk.common, &ths_clk.common, @@ -677,7 +680,7 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = { [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, - [CLK_BUS_SCR] = &bus_scr_clk.common.hw, + [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw, [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw, [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, [CLK_THS] = &ths_clk.common.hw, @@ -730,7 +733,123 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = { .num = CLK_NUMBER, };
-static struct ccu_reset_map sun8i_h3_ccu_resets[] = { +static struct clk_hw_onecell_data sun50i_h5_hw_clks = { + .hws = { + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw, + [CLK_PLL_AUDIO_BASE] = &pll_audio_base_clk.common.hw, + [CLK_PLL_AUDIO] = &pll_audio_clk.hw, + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw, + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw, + [CLK_PLL_AUDIO_8X] = &pll_audio_8x_clk.hw, + [CLK_PLL_VIDEO] = &pll_video_clk.common.hw, + [CLK_PLL_VE] = &pll_ve_clk.common.hw, + [CLK_PLL_DDR] = &pll_ddr_clk.common.hw, + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw, + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw, + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw, + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw, + [CLK_PLL_DE] = &pll_de_clk.common.hw, + [CLK_CPUX] = &cpux_clk.common.hw, + [CLK_AXI] = &axi_clk.common.hw, + [CLK_AHB1] = &ahb1_clk.common.hw, + [CLK_APB1] = &apb1_clk.common.hw, + [CLK_APB2] = &apb2_clk.common.hw, + [CLK_AHB2] = &ahb2_clk.common.hw, + [CLK_BUS_CE] = &bus_ce_clk.common.hw, + [CLK_BUS_DMA] = &bus_dma_clk.common.hw, + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw, + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw, + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw, + [CLK_BUS_NAND] = &bus_nand_clk.common.hw, + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw, + [CLK_BUS_EMAC] = &bus_emac_clk.common.hw, + [CLK_BUS_TS] = &bus_ts_clk.common.hw, + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw, + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw, + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw, + [CLK_BUS_OTG] = &bus_otg_clk.common.hw, + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw, + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw, + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw, + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw, + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw, + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw, + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw, + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw, + [CLK_BUS_VE] = &bus_ve_clk.common.hw, + [CLK_BUS_TCON0] = &bus_tcon0_clk.common.hw, + [CLK_BUS_TCON1] = &bus_tcon1_clk.common.hw, + [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw, + [CLK_BUS_CSI] = &bus_csi_clk.common.hw, + [CLK_BUS_TVE] = &bus_tve_clk.common.hw, + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw, + [CLK_BUS_DE] = &bus_de_clk.common.hw, + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw, + [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw, + [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw, + [CLK_BUS_CODEC] = &bus_codec_clk.common.hw, + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw, + [CLK_BUS_PIO] = &bus_pio_clk.common.hw, + [CLK_BUS_THS] = &bus_ths_clk.common.hw, + [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw, + [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw, + [CLK_BUS_I2S2] = &bus_i2s2_clk.common.hw, + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw, + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw, + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw, + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw, + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw, + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw, + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw, + [CLK_BUS_SCR0] = &bus_scr0_clk.common.hw, + [CLK_BUS_SCR1] = &bus_scr1_clk.common.hw, + [CLK_BUS_EPHY] = &bus_ephy_clk.common.hw, + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw, + [CLK_THS] = &ths_clk.common.hw, + [CLK_NAND] = &nand_clk.common.hw, + [CLK_MMC0] = &mmc0_clk.common.hw, + [CLK_MMC1] = &mmc1_clk.common.hw, + [CLK_MMC2] = &mmc2_clk.common.hw, + [CLK_TS] = &ts_clk.common.hw, + [CLK_CE] = &ce_clk.common.hw, + [CLK_SPI0] = &spi0_clk.common.hw, + [CLK_SPI1] = &spi1_clk.common.hw, + [CLK_I2S0] = &i2s0_clk.common.hw, + [CLK_I2S1] = &i2s1_clk.common.hw, + [CLK_I2S2] = &i2s2_clk.common.hw, + [CLK_SPDIF] = &spdif_clk.common.hw, + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw, + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw, + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw, + [CLK_USB_PHY3] = &usb_phy3_clk.common.hw, + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw, + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw, + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw, + [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw, + [CLK_DRAM] = &dram_clk.common.hw, + [CLK_DRAM_VE] = &dram_ve_clk.common.hw, + [CLK_DRAM_CSI] = &dram_csi_clk.common.hw, + [CLK_DRAM_DEINTERLACE] = &dram_deinterlace_clk.common.hw, + [CLK_DRAM_TS] = &dram_ts_clk.common.hw, + [CLK_DE] = &de_clk.common.hw, + [CLK_TCON0] = &tcon_clk.common.hw, + [CLK_TVE] = &tve_clk.common.hw, + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw, + [CLK_CSI_MISC] = &csi_misc_clk.common.hw, + [CLK_CSI_SCLK] = &csi_sclk_clk.common.hw, + [CLK_CSI_MCLK] = &csi_mclk_clk.common.hw, + [CLK_VE] = &ve_clk.common.hw, + [CLK_AC_DIG] = &ac_dig_clk.common.hw, + [CLK_AVS] = &avs_clk.common.hw, + [CLK_HDMI] = &hdmi_clk.common.hw, + [CLK_HDMI_DDC] = &hdmi_ddc_clk.common.hw, + [CLK_MBUS] = &mbus_clk.common.hw, + [CLK_GPU] = &gpu_clk.common.hw, + }, + .num = CLK_NUMBER, +}; + +static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = { [RST_USB_PHY0] = { 0x0cc, BIT(0) }, [RST_USB_PHY1] = { 0x0cc, BIT(1) }, [RST_USB_PHY2] = { 0x0cc, BIT(2) }, @@ -790,27 +909,39 @@ static struct ccu_reset_map sun8i_h3_ccu_resets[] = { [RST_BUS_UART1] = { 0x2d8, BIT(17) }, [RST_BUS_UART2] = { 0x2d8, BIT(18) }, [RST_BUS_UART3] = { 0x2d8, BIT(19) }, - [RST_BUS_SCR] = { 0x2d8, BIT(20) }, + [RST_BUS_SCR0] = { 0x2d8, BIT(20) }, + [RST_BUS_SCR1] = { 0x2d8, BIT(21) }, };
static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = { - .ccu_clks = sun8i_h3_ccu_clks, - .num_ccu_clks = ARRAY_SIZE(sun8i_h3_ccu_clks), + .ccu_clks = sunxi_h3_h5_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sunxi_h3_h5_ccu_clks),
.hw_clks = &sun8i_h3_hw_clks,
- .resets = sun8i_h3_ccu_resets, - .num_resets = ARRAY_SIZE(sun8i_h3_ccu_resets), + .resets = sunxi_h3_h5_ccu_resets, + .num_resets = ARRAY_SIZE(sunxi_h3_h5_ccu_resets), +}; + +static const struct sunxi_ccu_desc sun50i_h5_ccu_desc = { + .ccu_clks = sunxi_h3_h5_ccu_clks, + .num_ccu_clks = ARRAY_SIZE(sunxi_h3_h5_ccu_clks), + + .hw_clks = &sun50i_h5_hw_clks, + + .resets = sunxi_h3_h5_ccu_resets, + .num_resets = ARRAY_SIZE(sunxi_h3_h5_ccu_resets), };
-static struct ccu_mux_nb sun8i_h3_cpu_nb = { +static struct ccu_mux_nb sunxi_h3_h5_cpu_nb = { .common = &cpux_clk.common, .cm = &cpux_clk.mux, .delay_us = 1, /* > 8 clock cycles at 24 MHz */ .bypass_index = 1, /* index of 24 MHz oscillator */ };
-static void __init sun8i_h3_ccu_setup(struct device_node *node) +static void __init sunxi_h3_h5_ccu_init(struct device_node *node, + const struct sunxi_ccu_desc *desc) { void __iomem *reg; u32 val; @@ -823,14 +954,26 @@ static void __init sun8i_h3_ccu_setup(struct device_node *node) }
/* Force the PLL-Audio-1x divider to 4 */ - val = readl(reg + SUN8I_H3_PLL_AUDIO_REG); + val = readl(reg + SUNXI_H3_H5_PLL_AUDIO_REG); val &= ~GENMASK(19, 16); - writel(val | (3 << 16), reg + SUN8I_H3_PLL_AUDIO_REG); + writel(val | (3 << 16), reg + SUNXI_H3_H5_PLL_AUDIO_REG);
- sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc); + sunxi_ccu_probe(node, reg, desc);
ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk, - &sun8i_h3_cpu_nb); + &sunxi_h3_h5_cpu_nb); +} + +static void __init sun8i_h3_ccu_setup(struct device_node *node) +{ + sunxi_h3_h5_ccu_init(node, &sun8i_h3_ccu_desc); } CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu", sun8i_h3_ccu_setup); + +static void __init sun50i_h5_ccu_setup(struct device_node *node) +{ + sunxi_h3_h5_ccu_init(node, &sun50i_h5_ccu_desc); +} +CLK_OF_DECLARE(sun50i_h5_ccu, "allwinner,sun50i-h5-ccu", + sun50i_h5_ccu_setup); diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h similarity index 82% rename from drivers/clk/sunxi-ng/ccu-sun8i-h3.h rename to drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h index 78be712c7487..e5a78cc66d6b 100644 --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.h +++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h @@ -14,11 +14,11 @@ * GNU General Public License for more details. */
-#ifndef _CCU_SUN8I_H3_H_ -#define _CCU_SUN8I_H3_H_ +#ifndef _CCU_SUNXI_H3_H5_H_ +#define _CCU_SUNXI_H3_H5_H_
-#include <dt-bindings/clock/sun8i-h3-ccu.h> -#include <dt-bindings/reset/sun8i-h3-ccu.h> +#include <dt-bindings/clock/sunxi-h3-h5-ccu.h> +#include <dt-bindings/reset/sunxi-h3-h5-ccu.h>
#define CLK_PLL_CPUX 0 #define CLK_PLL_AUDIO_BASE 1 @@ -57,6 +57,9 @@
/* And the GPU module clock is exported */
-#define CLK_NUMBER (CLK_GPU + 1) +/* New clocks imported in H5 */ +/* The SCR1 bus gate is exported */
-#endif /* _CCU_SUN8I_H3_H_ */ +#define CLK_NUMBER (CLK_BUS_SCR1 + 1) + +#endif /* _CCU_SUNXI_H3_H5_H_ */ diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h deleted file mode 100644 index efb7ba2bd515..000000000000 --- a/include/dt-bindings/clock/sun8i-h3-ccu.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * Copyright (C) 2016 Maxime Ripard maxime.ripard@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_ -#define _DT_BINDINGS_CLK_SUN8I_H3_H_ - -#define CLK_CPUX 14 - -#define CLK_BUS_CE 20 -#define CLK_BUS_DMA 21 -#define CLK_BUS_MMC0 22 -#define CLK_BUS_MMC1 23 -#define CLK_BUS_MMC2 24 -#define CLK_BUS_NAND 25 -#define CLK_BUS_DRAM 26 -#define CLK_BUS_EMAC 27 -#define CLK_BUS_TS 28 -#define CLK_BUS_HSTIMER 29 -#define CLK_BUS_SPI0 30 -#define CLK_BUS_SPI1 31 -#define CLK_BUS_OTG 32 -#define CLK_BUS_EHCI0 33 -#define CLK_BUS_EHCI1 34 -#define CLK_BUS_EHCI2 35 -#define CLK_BUS_EHCI3 36 -#define CLK_BUS_OHCI0 37 -#define CLK_BUS_OHCI1 38 -#define CLK_BUS_OHCI2 39 -#define CLK_BUS_OHCI3 40 -#define CLK_BUS_VE 41 -#define CLK_BUS_TCON0 42 -#define CLK_BUS_TCON1 43 -#define CLK_BUS_DEINTERLACE 44 -#define CLK_BUS_CSI 45 -#define CLK_BUS_TVE 46 -#define CLK_BUS_HDMI 47 -#define CLK_BUS_DE 48 -#define CLK_BUS_GPU 49 -#define CLK_BUS_MSGBOX 50 -#define CLK_BUS_SPINLOCK 51 -#define CLK_BUS_CODEC 52 -#define CLK_BUS_SPDIF 53 -#define CLK_BUS_PIO 54 -#define CLK_BUS_THS 55 -#define CLK_BUS_I2S0 56 -#define CLK_BUS_I2S1 57 -#define CLK_BUS_I2S2 58 -#define CLK_BUS_I2C0 59 -#define CLK_BUS_I2C1 60 -#define CLK_BUS_I2C2 61 -#define CLK_BUS_UART0 62 -#define CLK_BUS_UART1 63 -#define CLK_BUS_UART2 64 -#define CLK_BUS_UART3 65 -#define CLK_BUS_SCR 66 -#define CLK_BUS_EPHY 67 -#define CLK_BUS_DBG 68 - -#define CLK_THS 69 -#define CLK_NAND 70 -#define CLK_MMC0 71 -#define CLK_MMC0_SAMPLE 72 -#define CLK_MMC0_OUTPUT 73 -#define CLK_MMC1 74 -#define CLK_MMC1_SAMPLE 75 -#define CLK_MMC1_OUTPUT 76 -#define CLK_MMC2 77 -#define CLK_MMC2_SAMPLE 78 -#define CLK_MMC2_OUTPUT 79 -#define CLK_TS 80 -#define CLK_CE 81 -#define CLK_SPI0 82 -#define CLK_SPI1 83 -#define CLK_I2S0 84 -#define CLK_I2S1 85 -#define CLK_I2S2 86 -#define CLK_SPDIF 87 -#define CLK_USB_PHY0 88 -#define CLK_USB_PHY1 89 -#define CLK_USB_PHY2 90 -#define CLK_USB_PHY3 91 -#define CLK_USB_OHCI0 92 -#define CLK_USB_OHCI1 93 -#define CLK_USB_OHCI2 94 -#define CLK_USB_OHCI3 95 - -#define CLK_DRAM_VE 97 -#define CLK_DRAM_CSI 98 -#define CLK_DRAM_DEINTERLACE 99 -#define CLK_DRAM_TS 100 -#define CLK_DE 101 -#define CLK_TCON0 102 -#define CLK_TVE 103 -#define CLK_DEINTERLACE 104 -#define CLK_CSI_MISC 105 -#define CLK_CSI_SCLK 106 -#define CLK_CSI_MCLK 107 -#define CLK_VE 108 -#define CLK_AC_DIG 109 -#define CLK_AVS 110 -#define CLK_HDMI 111 -#define CLK_HDMI_DDC 112 - -#define CLK_GPU 114 - -#endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */ diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h new file mode 120000 index 000000000000..ef38232141e4 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-h3-ccu.h @@ -0,0 +1 @@ +sunxi-h3-h5-ccu.h \ No newline at end of file diff --git a/include/dt-bindings/clock/sunxi-h3-h5-ccu.h b/include/dt-bindings/clock/sunxi-h3-h5-ccu.h new file mode 100644 index 000000000000..4899eacef71d --- /dev/null +++ b/include/dt-bindings/clock/sunxi-h3-h5-ccu.h @@ -0,0 +1,148 @@ +/* + * Copyright (C) 2016 Maxime Ripard maxime.ripard@free-electrons.com + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUNXI_H3_H5_H_ +#define _DT_BINDINGS_CLK_SUNXI_H3_H5_H_ + +#define CLK_CPUX 14 + +#define CLK_BUS_CE 20 +#define CLK_BUS_DMA 21 +#define CLK_BUS_MMC0 22 +#define CLK_BUS_MMC1 23 +#define CLK_BUS_MMC2 24 +#define CLK_BUS_NAND 25 +#define CLK_BUS_DRAM 26 +#define CLK_BUS_EMAC 27 +#define CLK_BUS_TS 28 +#define CLK_BUS_HSTIMER 29 +#define CLK_BUS_SPI0 30 +#define CLK_BUS_SPI1 31 +#define CLK_BUS_OTG 32 +#define CLK_BUS_EHCI0 33 +#define CLK_BUS_EHCI1 34 +#define CLK_BUS_EHCI2 35 +#define CLK_BUS_EHCI3 36 +#define CLK_BUS_OHCI0 37 +#define CLK_BUS_OHCI1 38 +#define CLK_BUS_OHCI2 39 +#define CLK_BUS_OHCI3 40 +#define CLK_BUS_VE 41 +#define CLK_BUS_TCON0 42 +#define CLK_BUS_TCON1 43 +#define CLK_BUS_DEINTERLACE 44 +#define CLK_BUS_CSI 45 +#define CLK_BUS_TVE 46 +#define CLK_BUS_HDMI 47 +#define CLK_BUS_DE 48 +#define CLK_BUS_GPU 49 +#define CLK_BUS_MSGBOX 50 +#define CLK_BUS_SPINLOCK 51 +#define CLK_BUS_CODEC 52 +#define CLK_BUS_SPDIF 53 +#define CLK_BUS_PIO 54 +#define CLK_BUS_THS 55 +#define CLK_BUS_I2S0 56 +#define CLK_BUS_I2S1 57 +#define CLK_BUS_I2S2 58 +#define CLK_BUS_I2C0 59 +#define CLK_BUS_I2C1 60 +#define CLK_BUS_I2C2 61 +#define CLK_BUS_UART0 62 +#define CLK_BUS_UART1 63 +#define CLK_BUS_UART2 64 +#define CLK_BUS_UART3 65 +#define CLK_BUS_SCR0 66 +#define CLK_BUS_EPHY 67 +#define CLK_BUS_DBG 68 + +#define CLK_THS 69 +#define CLK_NAND 70 +#define CLK_MMC0 71 +#define CLK_MMC0_SAMPLE 72 +#define CLK_MMC0_OUTPUT 73 +#define CLK_MMC1 74 +#define CLK_MMC1_SAMPLE 75 +#define CLK_MMC1_OUTPUT 76 +#define CLK_MMC2 77 +#define CLK_MMC2_SAMPLE 78 +#define CLK_MMC2_OUTPUT 79 +#define CLK_TS 80 +#define CLK_CE 81 +#define CLK_SPI0 82 +#define CLK_SPI1 83 +#define CLK_I2S0 84 +#define CLK_I2S1 85 +#define CLK_I2S2 86 +#define CLK_SPDIF 87 +#define CLK_USB_PHY0 88 +#define CLK_USB_PHY1 89 +#define CLK_USB_PHY2 90 +#define CLK_USB_PHY3 91 +#define CLK_USB_OHCI0 92 +#define CLK_USB_OHCI1 93 +#define CLK_USB_OHCI2 94 +#define CLK_USB_OHCI3 95 + +#define CLK_DRAM_VE 97 +#define CLK_DRAM_CSI 98 +#define CLK_DRAM_DEINTERLACE 99 +#define CLK_DRAM_TS 100 +#define CLK_DE 101 +#define CLK_TCON0 102 +#define CLK_TVE 103 +#define CLK_DEINTERLACE 104 +#define CLK_CSI_MISC 105 +#define CLK_CSI_SCLK 106 +#define CLK_CSI_MCLK 107 +#define CLK_VE 108 +#define CLK_AC_DIG 109 +#define CLK_AVS 110 +#define CLK_HDMI 111 +#define CLK_HDMI_DDC 112 + +#define CLK_GPU 114 + +/* New clocks imported in H5 */ +#define CLK_BUS_SCR1 115 + +#endif /* _DT_BINDINGS_CLK_SUNXI_H3_H5_H_ */ diff --git a/include/dt-bindings/reset/sun8i-h3-ccu.h b/include/dt-bindings/reset/sun8i-h3-ccu.h deleted file mode 100644 index 6b7af80c26ec..000000000000 --- a/include/dt-bindings/reset/sun8i-h3-ccu.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2016 Maxime Ripard maxime.ripard@free-electrons.com - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#ifndef _DT_BINDINGS_RST_SUN8I_H3_H_ -#define _DT_BINDINGS_RST_SUN8I_H3_H_ - -#define RST_USB_PHY0 0 -#define RST_USB_PHY1 1 -#define RST_USB_PHY2 2 -#define RST_USB_PHY3 3 - -#define RST_MBUS 4 - -#define RST_BUS_CE 5 -#define RST_BUS_DMA 6 -#define RST_BUS_MMC0 7 -#define RST_BUS_MMC1 8 -#define RST_BUS_MMC2 9 -#define RST_BUS_NAND 10 -#define RST_BUS_DRAM 11 -#define RST_BUS_EMAC 12 -#define RST_BUS_TS 13 -#define RST_BUS_HSTIMER 14 -#define RST_BUS_SPI0 15 -#define RST_BUS_SPI1 16 -#define RST_BUS_OTG 17 -#define RST_BUS_EHCI0 18 -#define RST_BUS_EHCI1 19 -#define RST_BUS_EHCI2 20 -#define RST_BUS_EHCI3 21 -#define RST_BUS_OHCI0 22 -#define RST_BUS_OHCI1 23 -#define RST_BUS_OHCI2 24 -#define RST_BUS_OHCI3 25 -#define RST_BUS_VE 26 -#define RST_BUS_TCON0 27 -#define RST_BUS_TCON1 28 -#define RST_BUS_DEINTERLACE 29 -#define RST_BUS_CSI 30 -#define RST_BUS_TVE 31 -#define RST_BUS_HDMI0 32 -#define RST_BUS_HDMI1 33 -#define RST_BUS_DE 34 -#define RST_BUS_GPU 35 -#define RST_BUS_MSGBOX 36 -#define RST_BUS_SPINLOCK 37 -#define RST_BUS_DBG 38 -#define RST_BUS_EPHY 39 -#define RST_BUS_CODEC 40 -#define RST_BUS_SPDIF 41 -#define RST_BUS_THS 42 -#define RST_BUS_I2S0 43 -#define RST_BUS_I2S1 44 -#define RST_BUS_I2S2 45 -#define RST_BUS_I2C0 46 -#define RST_BUS_I2C1 47 -#define RST_BUS_I2C2 48 -#define RST_BUS_UART0 49 -#define RST_BUS_UART1 50 -#define RST_BUS_UART2 51 -#define RST_BUS_UART3 52 -#define RST_BUS_SCR 53 - -#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */ diff --git a/include/dt-bindings/reset/sun8i-h3-ccu.h b/include/dt-bindings/reset/sun8i-h3-ccu.h new file mode 120000 index 000000000000..ef38232141e4 --- /dev/null +++ b/include/dt-bindings/reset/sun8i-h3-ccu.h @@ -0,0 +1 @@ +sunxi-h3-h5-ccu.h \ No newline at end of file diff --git a/include/dt-bindings/reset/sunxi-h3-h5-ccu.h b/include/dt-bindings/reset/sunxi-h3-h5-ccu.h new file mode 100644 index 000000000000..1084c157c062 --- /dev/null +++ b/include/dt-bindings/reset/sunxi-h3-h5-ccu.h @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2016 Maxime Ripard maxime.ripard@free-electrons.com + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUNXI_H3_H5_H_ +#define _DT_BINDINGS_RST_SUNXI_H3_H5_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_PHY2 2 +#define RST_USB_PHY3 3 + +#define RST_MBUS 4 + +#define RST_BUS_CE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_MMC0 7 +#define RST_BUS_MMC1 8 +#define RST_BUS_MMC2 9 +#define RST_BUS_NAND 10 +#define RST_BUS_DRAM 11 +#define RST_BUS_EMAC 12 +#define RST_BUS_TS 13 +#define RST_BUS_HSTIMER 14 +#define RST_BUS_SPI0 15 +#define RST_BUS_SPI1 16 +#define RST_BUS_OTG 17 +#define RST_BUS_EHCI0 18 +#define RST_BUS_EHCI1 19 +#define RST_BUS_EHCI2 20 +#define RST_BUS_EHCI3 21 +#define RST_BUS_OHCI0 22 +#define RST_BUS_OHCI1 23 +#define RST_BUS_OHCI2 24 +#define RST_BUS_OHCI3 25 +#define RST_BUS_VE 26 +#define RST_BUS_TCON0 27 +#define RST_BUS_TCON1 28 +#define RST_BUS_DEINTERLACE 29 +#define RST_BUS_CSI 30 +#define RST_BUS_TVE 31 +#define RST_BUS_HDMI0 32 +#define RST_BUS_HDMI1 33 +#define RST_BUS_DE 34 +#define RST_BUS_GPU 35 +#define RST_BUS_MSGBOX 36 +#define RST_BUS_SPINLOCK 37 +#define RST_BUS_DBG 38 +#define RST_BUS_EPHY 39 +#define RST_BUS_CODEC 40 +#define RST_BUS_SPDIF 41 +#define RST_BUS_THS 42 +#define RST_BUS_I2S0 43 +#define RST_BUS_I2S1 44 +#define RST_BUS_I2S2 45 +#define RST_BUS_I2C0 46 +#define RST_BUS_I2C1 47 +#define RST_BUS_I2C2 48 +#define RST_BUS_UART0 49 +#define RST_BUS_UART1 50 +#define RST_BUS_UART2 51 +#define RST_BUS_UART3 52 +#define RST_BUS_SCR0 53 + +/* New resets imported in H5 */ +#define RST_BUS_SCR1 54 + +#endif /* _DT_BINDINGS_RST_SUNXI_H3_H5_H_ */