Thank you for your reply,
Please see below the output of alsa-info.sh before and after the
headphone plugged in
Before:
http://www.alsa-project.org/db/?f=a316eebf7b150b5897838be37bce4e8c9d95eaae
After:
http://www.alsa-project.org/db/?f=0f163003e9005972db5f97f21a45be67816e3801
I have 6 Jacks at the rear panel and two at the top (one output one
input)
I am afraid I do not know how to switch channel mode to retask.
Also, the computer is of a certain age, and the issue has started
several month ago but I never really looked into it, so I am not sure that change in power management will be relevant has it seems quite recent.
What is the model of your asus motherbroad ?
Seem lost the digial device 1 for SPDIF out
Pin Default 0x985601f0: [Fixed] Digital Out at Int HDMI
Is this internal spdif connector ?
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="VT1708S Digital", type="HDMI", device=3
APLAY
**** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: VT1708S Digital [VT1708S Digital] Subdevices: 1/1 Subdevice #0: subdevice #0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="VT1708S Digital", type="HDMI", device=3 Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM
Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=5, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM
Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital Control: name="HDMI Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x985601f0: [Fixed] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital Control: name="SPDIF Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x15
Do the driver need a pin fixup for the digital pin or more check when assign dig out type ?
If codec has two digital pin complex with diffferent type, check whether the primary digital pin complex support DETECT
case AC_JACK_SPDIF_OUT: case AC_JACK_DIG_OTHER_OUT: if (cfg->dig_outs >= ARRAY_SIZE(cfg->dig_out_pins)) { codec_info(codec, "ignore pin 0x%x, too many assigned pins\n", nid); continue; } cfg->dig_out_pins[cfg->dig_outs] = nid; cfg->dig_out_type[cfg->dig_outs] = (loc == AC_JACK_LOC_HDMI) ? HDA_PCM_TYPE_HDMI : HDA_PCM_TYPE_SPDIF; cfg->dig_outs++; + if (cfg->dig_outs == 2) + if (cfg->dig_out_type[0] != cfg->dig_out_type[1]) + if (! snd_hda_query_pin_caps(codec, cfg->dig_out_pins[0]) & AC_PINCAP_PRES_DETECT)) + cfg-> dig_out_type[0] = HDA_PCM_TYPE_SPDIF;
break;