On 11/25/2013 11:57 PM, noman pouigt wrote:
On Sun, Nov 24, 2013 at 11:45 PM, Lars-Peter Clausen lars@metafoo.de wrote:
On 11/25/2013 08:12 AM, noman pouigt wrote:
Hello Lars,
I was wondering if you can enlighten me on below query.
Commit:ce6cfaf1
From the commit text "The input and output paths for each widgets are only updated though during the respective run for that widget".
Thanks for replying.Probably my query was not clear.I wanted to understand the commit text which i quoted above.And my understanding of that commit text is below:
The text just describes the behavior as it was before the commit, which was separate power-up/power-down sequence for each widget.
Does this commit text mean: when mux or mixer_power_update is called then only the widget is powered and it's peer- widget source(path source) and widget sink(path sink)?
Hi,
What the commit does is to make sure that if a control is shared between multiple mixers/muxes to apply all the changes in the same update sequence. Instead of, as it was done before, to run a update sequence for each mixer/mux.
I understood this as you have clearly mentioned it with a nice diagram.
+------+ A1 ------| | | MUX1 |----- C1 B1 ------| | +------+ | control ---+ | +------+ A2 ------| | | MUX2 |----- C2 B2 ------| | +------+Can I represent the above diagram as below:
char *input_text_1[] = { "A1", "B1" };
struct soc_enum input_enum_1 = SOC_ENUM_SINGLE(some_register, some_bit, 2, input_text_1);
char *input_text_2[] = { "A2", "B2" }; struct soc_enum input_enum_2 = SOC_ENUM_SINGLE(some_register, some_bit, 2, input_text_2);
struct snd_kcontrol_new input_mux = SOC_DAPM_ENUM("C1", input_enum_1); struct snd_kcontrol_new input_mux = SOC_DAPM_ENUM("C2", input_enum_2);
dapm_route[] { "A1", "control","C1" "B1", "control","C1" "A2", "control","C2" "B2", "control","C2" };
The control part needs to have the name of one of the enum items. So this would be { "A1", "A1", "C1" } and so on.
Yes makes sense as then only it will know which widget to connect to as it has multiple widgets.
- Lars