Describing brief testing of the new MIDI 2.0 function driver.
Signed-off-by: Takashi Iwai tiwai@suse.de --- Documentation/usb/gadget-testing.rst | 141 +++++++++++++++++++++++++++ 1 file changed, 141 insertions(+)
diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 2fca40443dc9..0f3708ae5bc8 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -27,6 +27,7 @@ provided by gadgets. 18. UVC function 19. PRINTER function 20. UAC1 function (new API) + 21. MIDI2 function
1. ACM function @@ -965,3 +966,143 @@ e.g.::
$ arecord -f dat -t wav -D hw:CARD=UAC1Gadget,DEV=0 | \ aplay -D default:CARD=OdroidU3 + + +21. MIDI2 function +================== + +The function is provided by usb_f_midi2.ko module. +It will create a virtual ALSA card containing a UMP rawmidi device +where the UMP packet is looped back. In addition, a legacy rawmidi +device is created. The UMP rawmidi is bound with ALSA sequencer +clients, too. + +Function-specific configfs interface +------------------------------------ + +The function name to use when creating the function directory is "midi2". +The midi2 function provides these attributes in its function directory +as the card top-level information: + + ============= ================================================= + process_ump Bool flag to process UMP Stream messages (0 or 1) + static_block Bool flag for static blocks (0 or 1) + iface_name Optional interface name string + ============= ================================================= + +The directory contains a subdirectory "ep.0", and this provides the +attributes for a UMP Endpoint (which is a pair of USB MIDI Endpoints): + + ============= ================================================= + protocol_caps MIDI protocol capabilities; + 1: MIDI 1.0, 2: MIDI 2.0, or 3: both protocols + protocol Default MIDI protocol (either 1 or 2) + ep_name UMP Endpoint name string + product_id Product ID string + manufacturer Manufacture ID number (24 bit) + family Device family ID number (16 bit) + model Device model ID number (16 bit) + sw_revision Software revision (32 bit) + ============= ================================================= + +Each Endpoint subdirectory contains a subdirectory "block.0", which +represents the Function Block for Block 0 information. +Its attributes are: + + =============== =============================================== + name Function Block name string + direction Direction of this FB + 1: input, 2: output, or 3: bidirectional + first_group The first UMP Group number (0-15) + num_groups The number of groups in this FB (1-16) + ui_hint UI-hint of this FB + 0: unknown, 1: receiver, 2: sender, 3: both + midi_ci_verison Supported MIDI-CI version number (8 bit) + is_midi1 Legacy MIDI 1.0 device (0-2) + 0: MIDI 2.0 device, + 1: MIDI 1.0 without restriction, or + 2: MIDI 1.0 with low speed + sysex8_streams Max number of SysEx8 streams (8 bit) + active Bool flag for FB activity (0 or 1) + =============== =============================================== + +If multiple Function Blocks are required, you can add more Function +Blocks by creating subdirectories "block.<num>" with the corresponding +Function Block number (1, 2, ....). The FB subdirectories can be +dynamically removed, too. Note that the Function Block numbers must be +continuous. + +Similarly, if you multiple UMP Endpoints are required, you can add +more Endpoints by creating subdirectories "ep.<num>". The number must +be continuous. + +For emulating the old MIDI 2.0 device without UMP v1.1 support, pass 0 +to `process_ump` flag. Then the whole UMP v1.1 requests are ignored. + +Testing the MIDI2 function +-------------------------- + +On the device: run the gadget, and running:: + + $ cat /proc/asound/cards + +will show a new sound card containing a MIDI2 device. + +OTOH, on the host:: + + $ cat /proc/asound/cards + +will show a new sound card containing either MIDI1 or MIDI2 device, +depending on the USB audio driver configuration. + +On both, when ALSA sequencer is enabled on the host, you can find the +UMP MIDI client such as "MIDI 2.0 Gadget". + +As the driver simply loops back the data, there is no need for a real +device just for testing. + +For testing a MIDI input from the gadget to the host (e.g. emulating a +MIDI keyboard), you can send a MIDI stream like the following. + +On the gadget:: + + $ aconnect -o + .... + client 20: 'MIDI 2.0 Gadget' [type=kernel,card=1] + 0 'MIDI 2.0 ' + 1 'Group 1 (MIDI 2.0 Gadget I/O)' + $ aplaymidi -p 20:1 to_host.mid + +On the host:: + + $ aconnect -i + .... + client 24: 'MIDI 2.0 Gadget' [type=kernel,card=2] + 0 'MIDI 2.0 ' + 1 'Group 1 (MIDI 2.0 Gadget I/O)' + $ arecordmidi -p 24:1 from_gadget.mid + +If you have a UMP-capable application, you can use the UMP port to +send/receive the raw UMP packets, too. For example, aseqdump program +with UMP support can receive from UMP port. On the host:: + + $ aseqdump -u 2 -p 24:1 + Waiting for data. Press Ctrl+C to end. + Source Group Event Ch Data + 24:1 Group 0, Program change 0, program 0, Bank select 0:0 + 24:1 Group 0, Channel pressure 0, value 0x80000000 + +For testing a MIDI output to the gadget to the host (e.g. emulating a +MIDI synth), it'll be just other way round. + +On the gadget:: + + $ arecordmidi -p 20:1 from_host.mid + +On the host:: + + $ aplaymidi -p 24:1 to_gadget.mid + +The access to MIDI 1.0 on altset 0 on the host is supported, and it's +translated from/to UMP packets on the gadget. It's bound to only +Function Block 0.