On Haswell/Broadwell/Baytrail/Braswell, the DSP is not used for the HDMI/DP interface, and setting the dsp_driver parameter to a value > 1 has the side effect of preventing the HDaudio legacy driver from probing.
The DSP driver selection should really only handle cases where a DSP is actually used. This patch traps all known PCI devices and makes sure the HDaudio driver can always be probed.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Rander Wang rander.wang@linux.intel.com Reviewed-by: Guennadi Liakhovetski guennadi.liakhovetski@linux.intel.com --- sound/hda/intel-dsp-config.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c index 0dc079ba02ff..6a0d070c60c9 100644 --- a/sound/hda/intel-dsp-config.c +++ b/sound/hda/intel-dsp-config.c @@ -379,6 +379,20 @@ int snd_intel_dsp_driver_probe(struct pci_dev *pci) if (pci->vendor != 0x8086) return SND_INTEL_DSP_DRIVER_ANY;
+ /* + * Legacy devices don't have a PCI-based DSP and use HDaudio + * for HDMI/DP support, ignore kernel parameter + */ + switch (pci->device) { + case 0x160c: /* Broadwell */ + case 0x0a0c: /* Haswell */ + case 0x0c0c: + case 0x0d0c: + case 0x0f04: /* Baytrail */ + case 0x2284: /* Braswell */ + return SND_INTEL_DSP_DRIVER_ANY; + } + if (dsp_driver > 0 && dsp_driver <= SND_INTEL_DSP_DRIVER_LAST) return dsp_driver;