Hi Tomasz,
On Tue, Jul 23, 2013 at 1:12 AM, Tomasz Figa tomasz.figa@gmail.com wrote:
On Monday 22 of July 2013 11:15:30 Mike Turquette wrote:
Quoting Tomasz Figa (2013-07-22 09:28:47)
Hi Padmavathi, Andrew,
On Wednesday 10 of July 2013 17:41:51 Padmavathi Venna wrote:
From: Andrew Bresticker abrestic@chromium.org
This allows the input clocks to the Exynos AudioSS block to be specified via device-tree bindings. Default names will be used when an input clock is not given. This will be useful when adding support for the Exynos5420 where the audio bus clock is called "sclk_maudio0" instead of "sclk_audio0".
Signed-off-by: Andrew Bresticker abrestic@chromium.org Reviewed-on: https://gerrit.chromium.org/gerrit/57833 Reviewed-by: Simon Glass sjg@chromium.org
.../devicetree/bindings/clock/clk-exynos-audss.txt | 31
++++++++++++++++++- drivers/clk/samsung/clk-exynos-audss.c |> > 28 +++++++++++++++-- 2 files changed, 53 insertions(+), 6 deletions(-)
Well, this is basically how it should be done, but in current state of clock core I can see a problem: can we really rely on the order of clock initialization? I mean, we can't defer initialization of particular clock controller until all external clocks it needs are available, because there is no probing involved here.
your point is valid. In this case audio clk controller registration happening only after CMU clk controller from which audss needs clks. So this patch can't be taken in?
Thanks Padma
The clock core allows registering clocks even if their parents are not yet registered. I test this path with some dummy clocks every so often to make sure the re-parenting operation are completed successfully after the parents eventually are registered.
Sure it does, but this patch is about something different. It adds device tree based lookup (of_clk_get_by_name()) of external clocks (as opposed to existing lookup by name), which will fail if provider pointed by phandle is not registered yet.
This feature was not used in practice until recently with the advent of multiple clock controllers getting registered and DT description of clocks / clock controllers that may be "out of order". If you find any bugs please let me know ;-)
I will send you a bunch of patches sorting out issues I found in clk_set_rate() path, but give me some time to prepare them :).
As for multiple clock controllers, this is going to be funny. I have discussed this a bit with Sylwester and we managed to find some design issues that I think must be solved:
a) What about multiple controllers with identical clock names? Imagine two PMICs that can also generate 32 KHz clocks, both having them named "clk32k". Am I right saying that this won't work with current code?
b) What are the rules of using clock-output-names property (and what should be used in non-DT case)? I can imagine using it to assign platform- specific names of clock outputs of extra clock controllers (this would help in the above case of "clk32k"), but currently it seems like it is optional to use it in clock drivers and the meaning is provider-specific.
Best regards, Tomasz