On Aug 13 2015 15:24, Takashi Iwai wrote:
On Thu, 13 Aug 2015 02:20:13 +0200, Takashi Sakamoto wrote:
This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits.
TASCAM FireWire series consists of:
- PDI 1394P23 for IEEE 1394 PHY layer
- PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface
- XILINX XC9536XL
- XILINX Spartan-II XC2S100
- ATMEL AT91M42800A
Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam
A part of my work is based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels.
I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may enable to work. Or adding another node on the bus.
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp
sound/firewire/Kconfig | 11 +++ sound/firewire/Makefile | 1 + sound/firewire/tascam/Makefile | 2 + sound/firewire/tascam/tascam.c | 155 +++++++++++++++++++++++++++++++++++++++++ sound/firewire/tascam/tascam.h | 28 ++++++++ 5 files changed, 197 insertions(+) create mode 100644 sound/firewire/tascam/Makefile create mode 100644 sound/firewire/tascam/tascam.c create mode 100644 sound/firewire/tascam/tascam.h
diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig index 80f3b57..605cb91 100644 --- a/sound/firewire/Kconfig +++ b/sound/firewire/Kconfig @@ -135,4 +135,15 @@ config SND_FIREWIRE_DIGI00X To compile this driver as a module, choose M here: the module will be called snd-firewire-digi00x.
+config SND_FIREWIRE_TASCAM
- tristate "TASCAM FireWire series support"
- select SND_FIREWIRE_LIB
- help
Say Y here to include support for TASCAM.* FW-1884* FW-1082To compile this driver as a module, choose M here: the modulewill be called snd-firewire-tascam.- endif # SND_FIREWIRE
diff --git a/sound/firewire/Makefile b/sound/firewire/Makefile index 5325d15..6ae50f5 100644 --- a/sound/firewire/Makefile +++ b/sound/firewire/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_SND_SCS1X) += snd-scs1x.o obj-$(CONFIG_SND_FIREWORKS) += fireworks/ obj-$(CONFIG_SND_BEBOB) += bebob/ obj-$(CONFIG_SND_FIREWIRE_DIGI00X) += digi00x/ +obj-$(CONFIG_SND_FIREWIRE_TASCAM) += tascam/ diff --git a/sound/firewire/tascam/Makefile b/sound/firewire/tascam/Makefile new file mode 100644 index 0000000..29bdbce --- /dev/null +++ b/sound/firewire/tascam/Makefile @@ -0,0 +1,2 @@ +snd-firewire-tascam-objs := tascam.o +obj-m += snd-firewire-tascam.o
This should be obj-$(CONFIG_SND_FIREWIRE_TASCAM) += snd-firewire-tascam.o
Indeed. I completely forgot it...
Thank you
Takashi Sakamoto