Hello
The machine driver is not loaded when the BIOS uses the 10EC5642 _HID. Add it to the white list of known _HIDs, codec_name is already taken care of by previous commit
Tested on Asus T100TAF.
I'm trying to get sound working on my T100TAF i did apply all the 19 patches on top of broonie/sound and added UCM files to my system. Does the TAF need different UCM file than the T100TA?
The probe was tested but I am still fighting to get audio out. There are additional patches needed to work-around a BIOS changes that fixes the download issue shown in your log and also a change in the I2S routing, but we can't figure out if there are any additional changes needed. I suspect something is wrong with the i2S pin configuration (gpio setup) Those patches and updated firmware have not been submitted so far, i'd like to do so when it's actually working. This is on our to-do list, along with MCLK support and jack detection. There are so many variations of hardware that we are progressing slowly unfortunately.
Are there any updates on the TAF sound? I have been following your github, and saw there is a new TAF branch. Is it already possible to get sound out of our devices?
Thanks
Luka