On 09/01/2023 05:05, Padmanabhan Rajanbabu wrote:
-----Original Message----- From: Krzysztof Kozlowski [mailto:krzysztof.kozlowski@linaro.org] Sent: 03 January 2023 04:43 PM To: Padmanabhan Rajanbabu p.rajanbabu@samsung.com; lgirdwood@gmail.com; broonie@kernel.org; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; s.nawrocki@samsung.com; perex@perex.cz; tiwai@suse.com; pankaj.dubey@samsung.com; alim.akhtar@samsung.com; rcsekar@samsung.com; aswani.reddy@samsung.com Cc: alsa-devel@alsa-project.org; devicetree@vger.kernel.org; linux- kernel@vger.kernel.org; linux-samsung-soc@vger.kernel.org Subject: Re: [PATCH v2 5/5] arm64: dts: fsd: Add sound card node for Tesla FSD
On 03/01/2023 05:56, Padmanabhan Rajanbabu wrote:
Add device tree node support for sound card on Tesla FSD board
Signed-off-by: Padmanabhan Rajanbabu p.rajanbabu@samsung.com
arch/arm64/boot/dts/tesla/fsd-evb.dts | 37 +++++++++++++++++++++++++++ 1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts index e2fd49774f15..ce726bddfb50 100644 --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts @@ -29,6 +29,43 @@ device_type = "memory"; reg = <0x0 0x80000000 0x2 0x00000000>; };
- sound {
compatible = "simple-audio-card";
#address-cells = <1>;
#size-cells = <0>;
simple-audio-card,name = "FSD Audio Card";
simple-audio-card,widgets =
"Line", "Line Out",
I don't think you need to break the line after '='.
Okay, will change the same in the next patch set.
"Line", "Line In";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC2L", "Line In",
"MIC2R", "Line In";
status = "okay";
Why?
Okay, I understood that if there is no status entry, it is treated as "okay". I'll update the same in the next patch set.
simple-audio-card,dai-link@0 {
reg = <0>;
format = "i2s";
bitclock-master = <&tlv320aic3x>;
frame-master = <&tlv320aic3x>;
cpu0 {
Does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions).
I did not encounter any error while running dtbs_check for fsd-evb.dts
This is the command I executed make dtbs_check > output.txt 2>&1
dt-mk-schema --version: 2022.11
Please let me know if I'm missing anything here.
You are right. I misread the pattern in simple-card.yaml. I'll fix the file, so let's make these nodes: cpu-0 and cpu-1.
Best regards, Krzysztof