The patch
ASoC: stm32: sai: manage rebind issue
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 0d6defc7e0e437a9fd53622f7fd85740f38d5693 Mon Sep 17 00:00:00 2001
From: Olivier Moysan olivier.moysan@st.com Date: Wed, 4 Mar 2020 11:24:06 +0100 Subject: [PATCH] ASoC: stm32: sai: manage rebind issue
The commit e894efef9ac7 ("ASoC: core: add support to card rebind") allows to rebind the sound card after a rebind of one of its component. With this commit, the sound card is actually rebound, but may be no more functional. The following problems have been seen with STM32 SAI driver.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is: stm32_sai_sub_probe snd_soc_register_component snd_soc_try_rebind_card snd_soc_instantiate_card devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered, before snd_soc_instantiate_card() is called.
Modify SAI driver, to change the call sequence as follows: stm32_sai_sub_probe devm_snd_dmaengine_pcm_register snd_soc_register_component snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when devm_dmaengine_pcm_release() is executed. This occurs because SND_DMAENGINE_PCM_DRV_NAME component, has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component() explicitly from SAI driver, to have the right sequence.
Signed-off-by: Olivier Moysan olivier.moysan@st.com Message-Id: 20200304102406.8093-1-olivier.moysan@st.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/stm/stm32_sai_sub.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index 30bcd5d3a32a..10eb4b8e8e7e 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -1543,20 +1543,20 @@ static int stm32_sai_sub_probe(struct platform_device *pdev) return ret; }
- ret = devm_snd_soc_register_component(&pdev->dev, &stm32_component, - &sai->cpu_dai_drv, 1); + ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0); + if (ret) { + dev_err(&pdev->dev, "Could not register pcm dma\n"); + return ret; + } + + ret = snd_soc_register_component(&pdev->dev, &stm32_component, + &sai->cpu_dai_drv, 1); if (ret) return ret;
if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) conf = &stm32_sai_pcm_config_spdif;
- ret = devm_snd_dmaengine_pcm_register(&pdev->dev, conf, 0); - if (ret) { - dev_err(&pdev->dev, "Could not register pcm dma\n"); - return ret; - } - return 0; }
@@ -1565,6 +1565,8 @@ static int stm32_sai_sub_remove(struct platform_device *pdev) struct stm32_sai_sub_data *sai = dev_get_drvdata(&pdev->dev);
clk_unprepare(sai->pdata->pclk); + snd_dmaengine_pcm_unregister(&pdev->dev); + snd_soc_unregister_component(&pdev->dev);
return 0; }