Hello,
I have a Dell TB16 (same sound hardware as the WD15) and since the update to kernel 4.18 pulseaudio does not recognise any more the audio ports in the dock.
After some work tracking the problem I have found that pulseaudio reports a failure when using the UCM profile from Dell-WD15-Dock: ... ( 0.027| 0.000) I: [pulseaudio] module-alsa-card.c: Found UCM profiles ( 0.027| 0.000) D: [pulseaudio] alsa-ucm.c: UCM mapping: Mapping HiFi: hw:WD15Dock,0: source dev Mic ( 0.027| 0.000) D: [pulseaudio] alsa-ucm.c: UCM mapping: Mapping HiFi: hw:WD15Dock,1: sink dev LineOut ( 0.027| 0.000) D: [pulseaudio] alsa-ucm.c: UCM mapping: Mapping HiFi: hw:WD15Dock,0: sink dev Headphone ( 0.027| 0.000) D: [pulseaudio] alsa-mixer.c: Profile HiFi (Default), input=(null), output=(null) priority=8000, supported=yes n_input_mappings=1, n_output_mappings=2 ( 0.027| 0.000) D: [pulseaudio] alsa-mixer.c: Input HiFi: hw:WD15Dock,0: source ( 0.027| 0.000) D: [pulseaudio] alsa-mixer.c: Output HiFi: hw:WD15Dock,1: sink ( 0.027| 0.000) D: [pulseaudio] alsa-mixer.c: Output HiFi: hw:WD15Dock,0: sink ( 0.027| 0.000) I: [pulseaudio] alsa-ucm.c: Set ucm verb to HiFi ( 0.027| 0.000) D: [pulseaudio] alsa-util.c: Trying hw:WD15Dock,1 with SND_PCM_NO_AUTO_FORMAT ... ( 0.028| 0.000) I: [pulseaudio] (alsa-lib)pcm_hw.c: Invalid value for card ( 0.028| 0.000) I: [pulseaudio] alsa-util.c: Error opening PCM device hw:WD15Dock,1: No such device ...
The problem is that the device is called "Dock" and not "WD15Dock" so changing the file "alsa/ucm/Dell-WD15-Dock/HiFi.conf" with the right device name corrects the problem: --- alsa/ucm/Dell-WD15-Dock/HiFi.conf_ori 2018-09-14 17:54:35.022035850 +0200 +++ alsa/ucm/Dell-WD15-Dock/HiFi.conf 2018-09-14 17:54:55.722248500 +0200 @@ -3,7 +3,7 @@
Value { PlaybackChannels "2" - PlaybackPCM "hw:WD15Dock,0" + PlaybackPCM "hw:Dock,0" } }
@@ -12,7 +12,7 @@
Value { PlaybackChannels "2" - PlaybackPCM "hw:WD15Dock,1" + PlaybackPCM "hw:Dock,1" } }
@@ -21,6 +21,6 @@
Value { CaptureChannels "2" - CapturePCM "hw:WD15Dock,0" + CapturePCM "hw:Dock,0" } }
Is this the right change or the real problem is that the device name is "Dock" instead "WD15Dock"? Removing the "WD15" from the name is better, in that way it is also valid for the TB16.
Thanks
Andres Ayala