2010/10/4 Colin Guthrie gmane@colin.guthr.ie
'Twas brillig, and Raymond Yau at 04/10/10 12:09 did gyre and gimble:
2010/10/1 Clemens Ladisch clemens@ladisch.de
Takashi Iwai wrote:
Mark Brown wrote:
On Thu, Sep 30, 2010 at 04:09:56PM +0100, Colin Guthrie wrote:
*shouldn't* use them, but at present it does and they *are* active
and
used, so it's not an issue for me), the problem is rather one of
setting
Master (not PCM) to 0% aka -46.5dB causes some kind of auto-mute that cuts off all sound. It shouldn't do that.
Is this perhaps just an error in the TLV information - should it be flagging that the minimim gain is mute but isn't?
There is no clear (or consistent) definition in HD-audio codec, I
guess.
The HDA spec is quite clear that muting is done only with the mute bit.
Some chips do mute at 0 and some not.
Those that do are violating the specification.
But we have to support them anyway. Colin, please tell us the IDs of your codec so that we can add a TLV workaround to the driver.
Regards, Clemens
Actually, the softvol plugin behave as the same way as Colin describe
since
when the resolution is 2 , the softvol become a mute switch
http://git.alsa-project.org/?p=alsa-lib.git;a=commit;h=f78af4ab0412052aabb74...
So the question is why -51dB is selected as min_dB
Is this value enough for S16_LE or S32_LE for hda-intel ?
http://git.alsa-project.org/?p=alsa-kernel.git;a=commitdiff;h=eacbb9dba6b4c9...
As those DACs support -120dB to 0dB , but the driver can actually limit
the
dB range to -60dB to 0dB . so the minimum volume -60dB is definitly not
mute
in this case
why -60dB is selected ?
Just for clarity, the 0 -> -51dB range is for the PCM control (i.e. softvol) only. The Master control gives me -46.5dB in addtiion to that giving a total of -97.5dB. This still isn't as high as the -120dB you are mentioning, but it's a lot closer.
Of course I am lucky in that my Master apparently works fine but for those souls without any Master control, I presume the full range should be offered by the PCM softvol?
Col
Did it happen on both channels or only left channel ?
The workaround mentioned in errata is to lock the sample rate