This commit adds the following ALSA controls:
- S/PDIF Out Optical to switch S/PDIF Out from coaxial to optical - S/PDIF Out Professional to send the Pro bit in the output stream - ADAT-Internal to enable ADAT/TDIF Expansion Board (AEB/TEB) - XLR Breakout Cable if analogue I/O uses the XLR breakout cable - WCK48 to force WordClock to the 32-48kHz range (single speed) if the card is operating at higher frequencies
Signed-off-by: Adrian Knoth adi@drcomp.erfurt.thur.de
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index 4a3a822..15f1e7b 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -4327,7 +4327,12 @@ static struct snd_kcontrol_new snd_hdspm_controls_aio[] = { HDSPM_AUTOSYNC_SAMPLE_RATE("SPDIF Frequency", 2), HDSPM_AUTOSYNC_SAMPLE_RATE("ADAT Frequency", 3), HDSPM_AUTOSYNC_SAMPLE_RATE("TCO Frequency", 4), - HDSPM_AUTOSYNC_SAMPLE_RATE("SYNC IN Frequency", 5) + HDSPM_AUTOSYNC_SAMPLE_RATE("SYNC IN Frequency", 5), + HDSPM_TOGGLE_SETTING("S/PDIF Out Optical", HDSPM_c0_Spdif_Opt), + HDSPM_TOGGLE_SETTING("S/PDIF Out Professional", HDSPM_c0_Pro), + HDSPM_TOGGLE_SETTING("ADAT internal (AEB/TEB)", HDSPM_c0_AEB1), + HDSPM_TOGGLE_SETTING("XLR Breakout Cable", HDSPM_c0_Sym6db), + HDSPM_TOGGLE_SETTING("Single Speed WordClock Out", HDSPM_c0_Wck48)
/* HDSPM_INPUT_SELECT("Input Select", 0),