Ctirad Fertr wrote:
Hello,
I just bought an 1616M PCMCIA in addition to my old 1212m v1 and want to help improve the current driver. I wrote one little patch for those cards in the past (and some bigger patches for my experiments which were never released) and now I have some time to continue.
I'm going to add missing switches into mixer, make some changes in mixer to match the real I/O setup of each particular card model and perhaps also write some graphics patchmix like app.
A graphics patchmix like app would be the most useful at the moment. It would permit us to enable the 96kHz and 192kHz options, as for these different DSP code needs to be loaded, and that is best left to userland.
Unfortunatelly, I'm unable to fix the most important bugs (at least from my point of view) dua to lack of documentation and knowlenge of DSP programming. These are:
- non working 24bit playback. It should be on device 0,2 This device
exists, but cannot be openned for playback.It is the last thing needed for serious DAW.
I will look into this. Please raise a bug on alsa-project.org so we don't forget this.
- Non working S/PDIF (and probably ADAT, too) on 1616(M) microdock
ports. I think tese ports uses different set of registers than PCI 1010 host card. Am I right?
Correct, they are different. I will try to update the driver with some details tomorrow.
- Midi I/O works well on 1212m v1, but only when 48kHz is set. At
44.1kHz signalling is corrupted (different UART timing? How to fix it?). On 1616m microdock MIDI I/O does not work at all.
There is no mention in the docs regarding the clock rates affecting MIDI at all. I think this might be a trial and error fix. There is an extra register for midi routing config on the 1616m, so I might have to get that sorted.
I welcome any comments, advices and patches ;)
Ctirad _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel