Takashi Iwai schrieb:
At Wed, 12 May 2010 21:55:50 +0200, Thoralf Freitag wrote:
Takashi Iwai schrieb:
At Wed, 12 May 2010 11:33:06 +0530, Kunal Gangakhedkar wrote:
On Wednesday 12 May 2010 2:11:13 am Takashi Iwai wrote:
At Tue, 11 May 2010 22:23:42 +0200, I wrote:
At Wed, 12 May 2010 00:25:07 +0530, Kunal Gangakhedkar wrote:
> Hi Takashi, > > The commit 26ebe0a28986f4845b2c5bea43ac5cc0b9f27f0a seems to undo the mute LED > gpio fixes - at least on my dv6 series laptop. > > Maybe, we need to come up with a better solution to accommodate the problem > reported in this thread: > http://mailman.alsa-project.org/pipermail/alsa-devel/2010-May/027352.html > I believe, that's the reason for the commit, right? > > Yes. And as I checked the previous code, actually dv4 took GPIO 0. That's why I added it there back.
But, hmm, then it's really depending on the dv model number. Which PCI / codec SSID does your device have?
As a compromise, how about the additional patch below?
Yes, this patch fixes the problems on my dv6 machine and looks reasonable to me.
However, we need confirmation from Thoralf - whether it works for him too. I don't know if STAC_HP_DV4 can be reused for dv7 series machines - since I don't have access to verify it.
The PCI SSID was already given from his alsa-info.sh output. Actually, dv4 and dv7 seem to have very similar implementations and almost same SSIDs.
Tested-by: Kunal Gangakhedkar kunal.gangakhedkar@gmail.com (for dv6-1110ax) Acked-by: Kunal Gangakhedkar kunal.gangakhedkar@gmail.com
thanks,
Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Takashi,
sorry for my delay. I've a heavy workload with my job.
Try applying the patch, there is one error. IMHO it isn't a problem because my alsa-driver-1.0.23 patch_sigmatel.c file doesn't contain the line
spec->gpio_led = 0x01;at this place.
Hunk #2 succeeded at 1690 (offset -2 lines). Hunk #3 succeeded at 1703 (offset -2 lines). Hunk #4 succeeded at 1722 (offset -2 lines). Hunk #5 succeeded at 5676 (offset -5 lines). Hunk #6 FAILED at 5687. Hunk #7 succeeded at 5747 (offset -7 lines).
1 out of 7 hunks FAILED -- saving rejects to file sound/pci/hda/patch_sigmatel.c.rej
Here the content of patch_sigmatel.c.rej
*************** again: *** 5681,5687 **** * detection. */ spec->hp_detect = 1;
spec->gpio_led = 0x01; break; case STAC_HP_HDX: spec->num_dmics = 1;--- 5687,5692 ---- * detection. */ spec->hp_detect = 1; break; case STAC_HP_HDX: spec->num_dmics = 1;
But the patch doesn't solve the problem. Like before, the mute led isn't switched on/off (whithe/orange). Maybe set_hp_led_gpio overwrites the value for gpio_led, which is set static before ?
Try alsa-driver snapshot tarball below. ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz
The fixed patch is already included there.
Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Hi Takashi,
I can confirm you that the snaphot above is working with my HP DV 7-1160eg.
Thank you very much.
TF