On Wed, Aug 10, 2016 at 10:37:22PM -0700, Takashi Iwai wrote:
On Fri, 11 Aug 2006 06:42:04 +0200, Dharageswari R wrote:
On Tue, Aug 09, 2016 at 11:54:22PM -0700, Clemens Ladisch wrote:
Dharageswari R wrote:
While doing the validation of Skylake HDA driver using aplay and following parameters, we noticed underrun issues.
buffer_size : 9600 period_size : 4800
After doing further debugging, what I found is
1.DMA complete interrupt occurs for the first period. 2.Driver reads DMA position in buffer pointer and gets value of 4784.
The interrupt says that the buffer descriptor list entry has been completed, but the position in buffer pointer says that the entry has not yet been completed.
yes
I checked with HDA architects and they are saying that when the DMA completion interrupt occurs there can be slight delay before the DMA Position In Buffer Pointer gets updated.
The driver's interrupt handler takes care to read the interrupt status register first, so that any pending memory writes from the device are flushed.
Of course, this does not work if the device posts writes _after_ the interrupt has been raised. This is a bug in the hardware.
So driver is expected to refill data based on whatever content is reflected in the DMA Position In Buffer.
No, that's not how it works. The driver waits until all 4800 frames are available, and the only way to wake it up is with an interrupt.
There is no other interrupt apart from the buffer completion interrupt to know the post write completion. The only option here would be to poll till the position is equal or more than the period boundary with timeout before the period elapsed reporting. I thought of avoiding this if possible but doesnt seem to be true. Thanks for your reply. I will make sure that the driver reports period ellapsed at or above the period boundary.
We already have such a workaround, see bdj_pos_adj. The question is why it wasn't used or working well.
Even in legacy this issue is observed, will debug and send you the patch. Not sure if this issue was there in older platforms.
(BTW your MUA seems putting strange semicolons in To and Cc entries. Better to fix it.)
Sure.
Takashi
--