Yes Patrick.... same user for both
Really strange, isn't it!
Patrick Shirkey wrote:
On 07/10/2009 05:20 PM, Guilherme Longo wrote:
Hi all!
I couldn't find where this problem comes from.
Hi,
Sorry, to ask the obvious but, are you running as the same user for the server and the simple_client?
Patrick Shirkey Boost Hardware Ltd
I am connecting jack with the command:
jackd -d alsa -d default
and appears right below:
bash-3.1# jackd -d alsa -d default jackdmp 1.9.2 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2008 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in non-realtime mode creating alsa driver ... default|default|1024|2|48000|0|0|nomon|swmeter|-|32bit Using ALSA driver EMU10K1 running on SB Live [Unknown] (rev.10, serial:0x80671102) at 0xd000, irq 18 configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods ALSA: final selected sample format for capture: 32bit float little-endian You appear to be using the ALSA software "plug" layer, probably a result of using the "default" ALSA device. This is less efficient than it could be. Consider using a hardware device instead rather than using the plug layer. Usually the name of the hardware device that corresponds to the first soun ALSA: use 2 periods for capture ALSA: final selected sample format for playback: 32bit float little-endian You appear to be using the ALSA software "plug" layer, probably a result of using the "default" ALSA device. This is less efficient than it could be. Consider using a hardware device instead rather than using the plug layer. Usually the name of the hardware device that corresponds to the first soun ALSA: use 2 periods for playback
In another terminal, I am running a simple_cliente, and when I run it with the code:
quart$: simple_client audiofile jack server not running?
It is resulting of:
if ((client = jack_client_open(argv[1], JackNoStartServer, NULL)) == 0) { fprintf (stderr, "jack server not running?\n"); return 1; }
Plz, can I get som help here. Tks. _______________________________________________ Jack-Devel mailing list Jack-Devel@lists.jackaudio.org http://lists.jackaudio.org/listinfo.cgi/jack-devel-jackaudio.org