On Thu, 19 Mar 2020 11:28:14 +0200, Peter Ujfalusi wrote:
The audio support on the Common Processor Board board is using pcm3168a codec connected to McASP10 serializers in parallel setup.
The Infotainment board plugs into the Common Processor Board, the support of the extension board is extending the CPB audio support by adding the two codecs on the expansion board.
The audio support on the Infotainment Expansion Board consists of McASP0 connected to two pcm3168a codecs with dedicated set of serializers to each. The SCKI for pcm3168a is sourced from j721e AUDIO_REFCLK0 pin.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com
.../bindings/sound/ti,j721e-cpb-audio.yaml | 93 +++++++++++ .../sound/ti,j721e-cpb-ivi-audio.yaml | 145 ++++++++++++++++++ 2 files changed, 238 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml: $id: relative path/filename doesn't match actual path or filename expected: http://devicetree.org/schemas/sound/ti,j721e-cpb-ivi-audio.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml: duplicate '$id' value 'http://devicetree.org/schemas/sound/ti,j721e-cpb-audio.yaml#' Error: Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dts:21.23-24 syntax error FATAL ERROR: Unable to parse input tree scripts/Makefile.lib:311: recipe for target 'Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dt.yaml' failed make[1]: *** [Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... Makefile:1262: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1258054
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.