On 5/22/23 08:31, Vijendar Mukunda wrote:
Handle SoundWire manager related interrupts in ACP PCI driver interrupt handler and schedule SoundWire manager work queue for further processing.
Signed-off-by: Vijendar Mukunda Vijendar.Mukunda@amd.com
sound/soc/amd/ps/acp63.h | 4 ++++ sound/soc/amd/ps/pci-ps.c | 43 ++++++++++++++++++++++++++++++++++----- 2 files changed, 42 insertions(+), 5 deletions(-)
diff --git a/sound/soc/amd/ps/acp63.h b/sound/soc/amd/ps/acp63.h index 95bb1cef900a..d296059be4f0 100644 --- a/sound/soc/amd/ps/acp63.h +++ b/sound/soc/amd/ps/acp63.h @@ -88,6 +88,10 @@ /* time in ms for acp timeout */ #define ACP_TIMEOUT 500
+#define ACP_SDW0_STAT BIT(21) +#define ACP_SDW1_STAT BIT(2) +#define ACP_ERROR_IRQ BIT(29)
enum acp_config { ACP_CONFIG_0 = 0, ACP_CONFIG_1, diff --git a/sound/soc/amd/ps/pci-ps.c b/sound/soc/amd/ps/pci-ps.c index 02caae6968ad..26514e340a33 100644 --- a/sound/soc/amd/ps/pci-ps.c +++ b/sound/soc/amd/ps/pci-ps.c @@ -56,6 +56,7 @@ static int acp63_reset(void __iomem *acp_base) static void acp63_enable_interrupts(void __iomem *acp_base) { writel(1, acp_base + ACP_EXTERNAL_INTR_ENB);
- writel(ACP_ERROR_IRQ, acp_base + ACP_EXTERNAL_INTR_CNTL);
you may want to comment on why you don't have a read-modify-write approach for something that looks generic and not limited to a single error bit?
}
static void acp63_disable_interrupts(void __iomem *acp_base) @@ -102,23 +103,55 @@ static irqreturn_t acp63_irq_handler(int irq, void *dev_id) { struct acp63_dev_data *adata; struct pdm_dev_data *ps_pdm_data;
- u32 val;
struct amd_sdw_manager *amd_manager;
u32 ext_intr_stat, ext_intr_stat1;
u16 irq_flag = 0; u16 pdev_index;
adata = dev_id; if (!adata) return IRQ_NONE;
ext_intr_stat = readl(adata->acp63_base + ACP_EXTERNAL_INTR_STAT);
if (ext_intr_stat & ACP_SDW0_STAT) {
writel(ACP_SDW0_STAT, adata->acp63_base + ACP_EXTERNAL_INTR_STAT);
[1]
this is confusing, if this is w1c, should this be:
writel(ext_intr_stat, adata->acp63_base + ACP_EXTERNAL_INTR_STAT);
Otherwise you may be clearing fields that have not been set?
pdev_index = adata->sdw0_dev_index;
amd_manager = dev_get_drvdata(&adata->pdev[pdev_index]->dev);
if (amd_manager)
schedule_work(&amd_manager->amd_sdw_irq_thread);
irq_flag = 1;
- }
- val = readl(adata->acp63_base + ACP_EXTERNAL_INTR_STAT);
- if (val & BIT(PDM_DMA_STAT)) {
- ext_intr_stat1 = readl(adata->acp63_base + ACP_EXTERNAL_INTR_STAT1);
- if (ext_intr_stat1 & ACP_SDW1_STAT) {
writel(ACP_SDW1_STAT, adata->acp63_base + ACP_EXTERNAL_INTR_STAT1);
same comment here.
pdev_index = adata->sdw1_dev_index;
amd_manager = dev_get_drvdata(&adata->pdev[pdev_index]->dev);
if (amd_manager)
schedule_work(&amd_manager->amd_sdw_irq_thread);
irq_flag = 1;
- }
- if (ext_intr_stat & ACP_ERROR_IRQ) {
writel(ACP_ERROR_IRQ, adata->acp63_base + ACP_EXTERNAL_INTR_STAT);
[2]
and this is even move confusing because you may end-up writing twice to the same adata->acp63_base + ACP_EXTERNAL_INTR_STAT with [1] and [2], so the previous write
writel(ACP_SDW0_STAT, adata->acp63_base + ACP_EXTERNAL_INTR_STAT);
may have cleared the register already.
Something looks wrong here?
/* TODO: Report SoundWire Manager instance errors */
writel(0, adata->acp63_base + ACP_SW0_I2S_ERROR_REASON);
writel(0, adata->acp63_base + ACP_SW1_I2S_ERROR_REASON);
writel(0, adata->acp63_base + ACP_ERROR_STATUS);
irq_flag = 1;
- }
- if (ext_intr_stat & BIT(PDM_DMA_STAT)) { pdev_index = adata->pdm_dev_index; ps_pdm_data = dev_get_drvdata(&adata->pdev[pdev_index]->dev); writel(BIT(PDM_DMA_STAT), adata->acp63_base + ACP_EXTERNAL_INTR_STAT); if (ps_pdm_data->capture_stream) snd_pcm_period_elapsed(ps_pdm_data->capture_stream);
return IRQ_HANDLED;
}irq_flag = 1;
- return IRQ_NONE;
- if (irq_flag)
return IRQ_HANDLED;
- else
return IRQ_NONE;
}
static int sdw_amd_scan_controller(struct device *dev)