Hi,
I thought I'd try to use implicit feedback with my simple audio device:
Interface Descriptor: bInterfaceNumber 1 bAlternateSetting 0 Interface Descriptor: bInterfaceNumber 1 bAlternateSetting 1 AudioStreaming Interface Descriptor: ... Endpoint Descriptor: bEndpointAddress 0x01 EP 1 OUT Interface Descriptor: bInterfaceNumber 2 bAlternateSetting 0 Interface Descriptor: bInterfaceNumber 2 bAlternateSetting 1 AudioStreaming Interface Descriptor: ... Endpoint Descriptor: bEndpointAddress 0x82 EP 2 IN
So I wrote a patch to configure it like those M-Audio devices:
--- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -391,6 +391,17 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt) attr = fmt->ep_attr & USB_ENDPOINT_SYNCTYPE;
switch (subs->stream->chip->usb_id) { + case USB_ID(0x0582, 0x0018): + if (is_playback) { + implicit_fb = 1; + ep = 0x82; + iface = usb_ifnum_to_if(dev, 2); + if (!iface || iface->num_altsetting < 2) + return -EINVAL; + alts = &iface->altsetting[1]; + goto add_sync_ep; + } + break; case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */ if (is_playback) { implicit_fb = 1;
This works fine when playing something:
kernel: setting usb interface 1:1 kernel: Creating new playback data endpoint #1 kernel: Creating new capture data endpoint #82 kernel: Setting params for ep #1 (type 0, 8 urbs), ret=0 kernel: match_endpoint_audioformats: (fmt @ffff8801fefa8900) score 2 kernel: Setting params for ep #82 (type 0, 8 urbs), ret=0 kernel: Starting data EP @ffff8801fd4e8000 kernel: Starting sync EP @ffff8801fd2ac000
But when I then try to record at the same time, the driver refuses to configure the input endpoint (to the only format, which is already set):
kernel: setting usb interface 2:1 kernel: Re-using EP 82 in iface 2,1 @ffff8801fd2ac000 kernel: Unable to change format on ep #82: already in use
And despite that "alreay in use" check, the input endpoint is affected so much that playback breaks.
Is full duplex supposed to work? Does it work with other devices?
Regards, Clemens