28 May
2013
28 May
'13
5:19 p.m.
On Tue, May 28, 2013 at 04:05:22PM +0530, Padmavathi Venna wrote:
- avdd2:fixed-regulator@0 {
compatible = "regulator-fixed";regulator-name = "avdd2-supply";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-always-on;- };
- cpvdd:fixed-regulator@1 {
compatible = "regulator-fixed";regulator-name = "cpvdd-supply";regulator-min-microvolt = <1800000>;regulator-max-microvolt = <1800000>;regulator-always-on;- };
Several of these look like the same supply (especially the speaker ones) so it seems like it'd be sensible to define a single regulator for each of them. Not much practical difference but it might be neater.
- dbvdd:fixed-regulator@2 {
compatible = "regulator-fixed";regulator-name = "dbvdd-supply";regulator-min-microvolt = <3300000>;regulator-max-microvolt = <3300000>;regulator-always-on;- };
- spkvdd1:fixed-regulator@3 {
compatible = "regulator-fixed";regulator-name = "spkvdd1-supply";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;regulator-always-on;- };
- spkvdd2:fixed-regulator@4 {
compatible = "regulator-fixed";regulator-name = "spkvdd2-supply";regulator-min-microvolt = <5000000>;regulator-max-microvolt = <5000000>;regulator-always-on;- };
- i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>;
@@ -47,8 +87,17 @@ };
wm8994: wm8994@1a {
compatible = "wlf,wm8994";reg = <0x1a>;
compatible = "wlf,wm8994";reg = <0x1a>;gpio-controller;#gpio-cells = <2>;AVDD2-supply = <&avdd2>;CPVDD-supply = <&cpvdd>;DBVDD-supply = <&dbvdd>;SPKVDD1-supply = <&spkvdd1>;SPKVDD2-supply = <&spkvdd2>;-- 1.7.4.4