In the designware databook, the sequence of enabling audio clock and setting format is not clearly specified. Currently, audio clock is enabled in the end of hw_param ops after setting format.
On some monitors, there is a possibility that audio does not come out. Fix this by enabling audio clock in audio_startup ops before hw_param ops setting format.
Signed-off-by: Cheng-Yi Chiang cychiang@chromium.org --- drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c index 5cbb71a866d5..08b4adbb1ddc 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1);
+ return 0; +} + +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data) +{ + struct dw_hdmi_i2s_audio_data *audio = data; + struct dw_hdmi *hdmi = audio->hdmi; + dw_hdmi_audio_enable(hdmi);
return 0; @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component, }
static struct hdmi_codec_ops dw_hdmi_i2s_ops = { + .audio_startup = dw_hdmi_i2s_audio_startup, .hw_params = dw_hdmi_i2s_hw_params, .audio_shutdown = dw_hdmi_i2s_audio_shutdown, .get_dai_id = dw_hdmi_i2s_get_dai_id,