The tsadc supports two reset methods: the cru and the otp_gpio. All boards except veyron and the evb simply use the cru-method and reuse the pin for something else. On the Firefly-RK3288 this is for example the case with the headphone. To prevent pinctrl-conflicts with these don't set the otp-gpio pinctrl by default but only in the boards using it.
Signed-off-by: Romain Perier romain.perier@collabora.com --- arch/arm/boot/dts/rk3288-evb.dtsi | 4 ++++ arch/arm/boot/dts/rk3288-veyron.dtsi | 4 ++++ arch/arm/boot/dts/rk3288.dtsi | 4 ---- 3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 0dec94c3583b..28a69334b2d1 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -290,6 +290,10 @@ };
&tsadc { + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ status = "okay"; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index d709fa1847f9..697c9a78cb7e 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -398,6 +398,10 @@ &tsadc { status = "okay";
+ pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2484f11761ea..3a752c0cbc73 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -541,10 +541,6 @@ clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; - pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; status = "disabled";