On 1/30/23 16:54, Wesley Cheng wrote:
Hi Pierre,
On 1/26/2023 7:38 AM, Pierre-Louis Bossart wrote:
On 1/25/23 21:14, Wesley Cheng wrote:
The QC ADSP is able to support USB playback endpoints, so that the main application processor can be placed into lower CPU power modes. This adds the required AFE port configurations and port start command to start an audio session.
Specifically, the QC ADSP can support all potential endpoints that are exposed by the audio data interface. This includes, feedback endpoints (both implicit and explicit) as well as the isochronous (data) endpoints. The size of audio samples sent per USB frame (microframe) will be adjusted based on information received on the feedback endpoint.
I think you meant "support all potential endpoint types"
It's likely that some USB devices have more endpoints than what the DSP can handle, no?
True, as we discussed before, we only handle the endpoints for the audio interface. Other endpoints, such as HID, or control is still handled by the main processor.
The number of isoc/audio endpoints can be larger than 1 per direction, it's not uncommon for a USB device to have multiple connectors on the front side for instruments, mics, monitor speakers, you name it. Just google 'motu' or 'rme usb' and you'll see examples of USB devices that are very different from plain vanilla headsets.
And that brings me back to the question: what is a port and the relationship between port/backend/endpoints?
Sorry for being picky on terminology, but if I learned something in days in standardization it's that there shouldn't be any ambiguity on concepts, otherwise everyone is lost at some point.
No worries, I can understand where you're coming from :). After re-reading some of the notations used, I can see where people may be confused.
static struct afe_port_map port_maps[AFE_PORT_MAX] = { + [USB_RX] = { AFE_PORT_ID_USB_RX, USB_RX, 1, 1}, [HDMI_RX] = { AFE_PORT_ID_MULTICHAN_HDMI_RX, HDMI_RX, 1, 1}, [SLIMBUS_0_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX, SLIMBUS_0_RX, 1, 1},
And if I look here a port seems to be a very specific AFE concept related to interface type? Do we even need to refer to a port in the USB parts?
Well, this is a design specific to how the Q6 AFE is implemented. There is a concept for an AFE port to be opened. However, as mentioned earlier, the "port" term used in soc-usb should be more for how many USB devices can be supported.
If there was a case the audio DSP would support more than one USB device, I believe another AFE port would need to be added.
would the suggested infrastructure work though, even if the DSP could deal with multiple endpoints on different devices ? You have static mutexes and ops, can that scale to more than one USB device?