The usb_control_msg_send() and usb_control_msg_recv() calls can return an error if a "short" write/read happens, so move the driver over to using those calls instead, saving some logic in the wrapper functions that were being used in this driver.
This also resolves a long-staging bug where data on the stack was being sent in a USB control message, which was not allowed.
Cc: Jaroslav Kysela perex@perex.cz Cc: alsa-devel@alsa-project.org Reviewed-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- v2: - Added reviewed-by from Takashi
sound/usb/6fire/firmware.c | 38 +++++++++++++------------------------- 1 file changed, 13 insertions(+), 25 deletions(-)
diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index 69137c14d0dc..5b8994070c96 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -158,29 +158,17 @@ static int usb6fire_fw_ihex_init(const struct firmware *fw, static int usb6fire_fw_ezusb_write(struct usb_device *device, int type, int value, char *data, int len) { - int ret; - - ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), type, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, 0, data, len, HZ); - if (ret < 0) - return ret; - else if (ret != len) - return -EIO; - return 0; + return usb_control_msg_send(device, 0, type, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, data, len, HZ); }
static int usb6fire_fw_ezusb_read(struct usb_device *device, int type, int value, char *data, int len) { - int ret = usb_control_msg(device, usb_rcvctrlpipe(device, 0), type, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, - 0, data, len, HZ); - if (ret < 0) - return ret; - else if (ret != len) - return -EIO; - return 0; + return usb_control_msg_recv(device, 0, type, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, 0, data, len, HZ); }
static int usb6fire_fw_fpga_write(struct usb_device *device, @@ -230,7 +218,7 @@ static int usb6fire_fw_ezusb_upload( /* upload firmware image */ data = 0x01; /* stop ezusb cpu */ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); - if (ret < 0) { + if (ret) { kfree(rec); release_firmware(fw); dev_err(&intf->dev, @@ -242,7 +230,7 @@ static int usb6fire_fw_ezusb_upload( while (usb6fire_fw_ihex_next_record(rec)) { /* write firmware */ ret = usb6fire_fw_ezusb_write(device, 0xa0, rec->address, rec->data, rec->len); - if (ret < 0) { + if (ret) { kfree(rec); release_firmware(fw); dev_err(&intf->dev, @@ -257,7 +245,7 @@ static int usb6fire_fw_ezusb_upload( if (postdata) { /* write data after firmware has been uploaded */ ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr, postdata, postlen); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to upload ezusb firmware %s: post urb.\n", fwname); @@ -267,7 +255,7 @@ static int usb6fire_fw_ezusb_upload(
data = 0x00; /* resume ezusb cpu */ ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to upload ezusb firmware %s: end message.\n", fwname); @@ -302,7 +290,7 @@ static int usb6fire_fw_fpga_upload( end = fw->data + fw->size;
ret = usb6fire_fw_ezusb_write(device, 8, 0, NULL, 0); - if (ret < 0) { + if (ret) { kfree(buffer); release_firmware(fw); dev_err(&intf->dev, @@ -327,7 +315,7 @@ static int usb6fire_fw_fpga_upload( kfree(buffer);
ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to upload fpga firmware: end urb.\n"); return ret; @@ -363,7 +351,7 @@ int usb6fire_fw_init(struct usb_interface *intf) u8 buffer[12];
ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8); - if (ret < 0) { + if (ret) { dev_err(&intf->dev, "unable to receive device firmware state.\n"); return ret;