The patch
ASoC: Intel: add machine driver for BYT/CHT + ES8316
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From a03bdaa565cbf23fa86697727a7d2bf1465e7a03 Mon Sep 17 00:00:00 2001
From: Daniel Drake drake@endlessm.com Date: Mon, 12 Jun 2017 11:01:46 -0600 Subject: [PATCH] ASoC: Intel: add machine driver for BYT/CHT + ES8316
Add new machine driver, tested with Weibu F3C MiniPC.
Based heavily on code provided by David Yang @ Everest, and other machine drivers in the same directory.
Signed-off-by: David Yang yangxiaohua@everest-semi.com [drake@endlessm.com: cleanups and modernization] Signed-off-by: Daniel Drake drake@endlessm.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/intel/Kconfig | 12 ++ sound/soc/intel/atom/sst/sst_acpi.c | 7 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/bytcht_es8316.c | 300 +++++++++++++++++++++++++++++++++ 4 files changed, 321 insertions(+) create mode 100644 sound/soc/intel/boards/bytcht_es8316.c
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index a9c50d022e73..35a6a5c55914 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -214,6 +214,18 @@ config SND_SOC_INTEL_BYT_CHT_DA7213_MACH platforms with DA7212/7213 audio codec. If unsure select "N".
+config SND_SOC_INTEL_BYT_CHT_ES8316_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ES8316 + select SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + select SND_SOC_INTEL_SST_MATCH if ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with ES8316 audio codec. + If unsure select "N". + config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" depends on X86_INTEL_LPSS && I2C && ACPI diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index cf88cd1865fb..0e928d54305d 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -611,6 +611,13 @@ static struct sst_acpi_mach sst_acpi_chv[] = { .board = "bytcht_da7213", .pdata = &chv_platform_data }, + { + .id = "ESSX8316", + .drv_name = "bytcht_es8316", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_es8316", + .pdata = &chv_platform_data + }, /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ { .id = "10EC5640", diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index c92ebcac0222..c4e986f03ec9 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -11,6 +11,7 @@ snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o snd-soc-sst-byt-cht-da7213-objs := bytcht_da7213.o +snd-soc-sst-byt-cht-es8316-objs := bytcht_es8316.o snd-soc-sst-byt-cht-nocodec-objs := bytcht_nocodec.o snd-soc-kbl_rt5663_max98927-objs := kbl_rt5663_max98927.o snd-soc-skl_rt286-objs := skl_rt286.o @@ -30,6 +31,7 @@ obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH) += snd-soc-sst-byt-cht-da7213.o +obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH) += snd-soc-sst-byt-cht-es8316.o obj-$(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) += snd-soc-sst-byt-cht-nocodec.o obj-$(CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH) += snd-soc-kbl_rt5663_max98927.o obj-$(CONFIG_SND_SOC_INTEL_SKL_RT286_MACH) += snd-soc-skl_rt286.o diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c new file mode 100644 index 000000000000..52635462dac6 --- /dev/null +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -0,0 +1,300 @@ +/* + * bytcht_es8316.c - ASoc Machine driver for Intel Baytrail/Cherrytrail + * platforms with Everest ES8316 SoC + * + * Copyright (C) 2017 Endless Mobile, Inc. + * Authors: David Yang yangxiaohua@everest-semi.com, + * Daniel Drake drake@endlessm.com + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <asm/platform_sst_audio.h> +#include <linux/clk.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include "../atom/sst-atom-controls.h" +#include "../common/sst-acpi.h" +#include "../common/sst-dsp.h" + +struct byt_cht_es8316_private { + struct clk *mclk; +}; + +#define CODEC_DAI1 "ES8316 HiFi" + +static inline struct snd_soc_dai *get_codec_dai(struct snd_soc_card *card) +{ + struct snd_soc_pcm_runtime *rtd; + + list_for_each_entry(rtd, &card->rtd_list, list) { + if (!strncmp(rtd->codec_dai->name, CODEC_DAI1, + strlen(CODEC_DAI1))) + return rtd->codec_dai; + } + return NULL; +} + +static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + + /* + * The codec supports two analog microphone inputs. I have only + * tested MIC1. A DMIC route could also potentially be added + * if such functionality is found on another platform. + */ + SND_SOC_DAPM_MIC("Microphone 1", NULL), + SND_SOC_DAPM_MIC("Microphone 2", NULL), +}; + +static const struct snd_soc_dapm_route byt_cht_es8316_audio_map[] = { + {"MIC1", NULL, "Microphone 1"}, + {"MIC2", NULL, "Microphone 2"}, + + {"Headphone", NULL, "HPOL"}, + {"Headphone", NULL, "HPOR"}, + + {"Playback", NULL, "ssp2 Tx"}, + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx" }, + {"codec_in1", NULL, "ssp2 Rx" }, + {"ssp2 Rx", NULL, "Capture"}, +}; + +static const struct snd_kcontrol_new byt_cht_es8316_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Microphone 1"), + SOC_DAPM_PIN_SWITCH("Microphone 2"), +}; + +static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime) +{ + struct snd_soc_card *card = runtime->card; + struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card); + int ret; + + card->dapm.idle_bias_off = true; + + /* + * The firmware might enable the clock at boot (this information + * may or may not be reflected in the enable clock register). + * To change the rate we must disable the clock first to cover these + * cases. Due to common clock framework restrictions that do not allow + * to disable a clock that has not been enabled, we need to enable + * the clock first. + */ + ret = clk_prepare_enable(priv->mclk); + if (!ret) + clk_disable_unprepare(priv->mclk); + + ret = clk_set_rate(priv->mclk, 19200000); + if (ret) + dev_err(card->dev, "unable to set MCLK rate\n"); + + ret = clk_prepare_enable(priv->mclk); + if (ret) + dev_err(card->dev, "unable to enable MCLK\n"); + + ret = snd_soc_dai_set_sysclk(runtime->codec_dai, 0, 19200000, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(card->dev, "can't set codec clock %d\n", ret); + return ret; + } + + return 0; +} + +static const struct snd_soc_pcm_stream byt_cht_es8316_dai_params = { + .formats = SNDRV_PCM_FMTBIT_S24_LE, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, +}; + +static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + int ret; + + /* The DSP will covert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot, override config + * with explicit setting to I2S 2ch 24-bit. The word length is set with + * dai_set_tdm_slot() since there is no other API exposed + */ + ret = snd_soc_dai_set_fmt(rtd->cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS + ); + if (ret < 0) { + dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24); + if (ret < 0) { + dev_err(rtd->dev, "can't set I2S config, err %d\n", ret); + return ret; + } + + return 0; +} + +static int byt_cht_es8316_aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, 48000); +} + +static const struct snd_soc_ops byt_cht_es8316_aif1_ops = { + .startup = byt_cht_es8316_aif1_startup, +}; + +static struct snd_soc_dai_link byt_cht_es8316_dais[] = { + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "media-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &byt_cht_es8316_aif1_ops, + }, + + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .cpu_dai_name = "deepbuffer-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &byt_cht_es8316_aif1_ops, + }, + + [MERR_DPCM_COMPR] = { + .name = "Compressed Port", + .stream_name = "Compress", + .cpu_dai_name = "compress-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + }, + + /* back ends */ + { + /* Only SSP2 has been tested here, so BYT-CR platforms that + * require SSP0 will not work. + */ + .name = "SSP2-Codec", + .id = 1, + .cpu_dai_name = "ssp2-port", + .platform_name = "sst-mfld-platform", + .no_pcm = 1, + .codec_dai_name = "ES8316 HiFi", + .codec_name = "i2c-ESSX8316:00", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS, + .be_hw_params_fixup = byt_cht_es8316_codec_fixup, + .nonatomic = true, + .dpcm_playback = 1, + .dpcm_capture = 1, + .init = byt_cht_es8316_init, + }, +}; + + +/* SoC card */ +static struct snd_soc_card byt_cht_es8316_card = { + .name = "bytcht-es8316", + .owner = THIS_MODULE, + .dai_link = byt_cht_es8316_dais, + .num_links = ARRAY_SIZE(byt_cht_es8316_dais), + .dapm_widgets = byt_cht_es8316_widgets, + .num_dapm_widgets = ARRAY_SIZE(byt_cht_es8316_widgets), + .dapm_routes = byt_cht_es8316_audio_map, + .num_dapm_routes = ARRAY_SIZE(byt_cht_es8316_audio_map), + .controls = byt_cht_es8316_controls, + .num_controls = ARRAY_SIZE(byt_cht_es8316_controls), + .fully_routed = true, +}; + +static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) +{ + int ret = 0; + struct byt_cht_es8316_private *priv; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); + if (!priv) + return -ENOMEM; + + /* register the soc card */ + byt_cht_es8316_card.dev = &pdev->dev; + snd_soc_card_set_drvdata(&byt_cht_es8316_card, priv); + + priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(priv->mclk)) { + ret = PTR_ERR(priv->mclk); + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %d\n", + ret); + return ret; + } + + ret = devm_snd_soc_register_card(&pdev->dev, &byt_cht_es8316_card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret); + return ret; + } + platform_set_drvdata(pdev, &byt_cht_es8316_card); + return ret; +} + +static struct platform_driver snd_byt_cht_es8316_mc_driver = { + .driver = { + .name = "bytcht_es8316", + }, + .probe = snd_byt_cht_es8316_mc_probe, +}; + +module_platform_driver(snd_byt_cht_es8316_mc_driver); +MODULE_DESCRIPTION("ASoC Intel(R) Baytrail/Cherrytrail Machine driver"); +MODULE_AUTHOR("David Yang yangxiaohua@everest-semi.com"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bytcht_es8316");