From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
Current rsnd is using dev_dbg() if irq error happen, but it makes debug very difficult if some strange things happen. This patch uses dev_info() for it, and rename the macro name.
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- sound/soc/sh/rcar/rsnd.h | 5 +++-- sound/soc/sh/rcar/src.c | 6 +++--- sound/soc/sh/rcar/ssi.c | 14 +++++++------- 3 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index aec54552474d..9736a94b9c39 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -881,9 +881,10 @@ void rsnd_mod_make_sure(struct rsnd_mod *mod, enum rsnd_mod_type type); * * #define RSND_DEBUG_NO_IRQ_STATUS 1 */ -#define rsnd_dbg_irq_status(dev, param...) \ +#define rsnd_print_irq_status(dev, param...) do { \ if (!IS_BUILTIN(RSND_DEBUG_NO_IRQ_STATUS)) \ - dev_dbg(dev, param) + dev_info(dev, param); \ +} while (0)
/* * If you don't need rsnd_dai_call debug message, diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c index 628af8f3920d..7a7d6dc335a4 100644 --- a/sound/soc/sh/rcar/src.c +++ b/sound/soc/sh/rcar/src.c @@ -17,7 +17,7 @@ /* * you can enable below define if you don't need * SSI interrupt status debug message when debugging - * see rsnd_dbg_irq_status() + * see rsnd_print_irq_status() * * #define RSND_DEBUG_NO_IRQ_STATUS 1 */ @@ -421,8 +421,8 @@ static bool rsnd_src_error_occurred(struct rsnd_mod *mod) status0 = rsnd_mod_read(mod, SCU_SYS_STATUS0); status1 = rsnd_mod_read(mod, SCU_SYS_STATUS1); if ((status0 & val0) || (status1 & val1)) { - rsnd_dbg_irq_status(dev, "%s err status : 0x%08x, 0x%08x\n", - rsnd_mod_name(mod), status0, status1); + rsnd_print_irq_status(dev, "%s err status : 0x%08x, 0x%08x\n", + rsnd_mod_name(mod), status0, status1);
ret = true; } diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 2dceac994b37..ac920800af37 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -11,7 +11,7 @@ /* * you can enable below define if you don't need * SSI interrupt status debug message when debugging - * see rsnd_dbg_irq_status() + * see rsnd_print_irq_status() * * #define RSND_DEBUG_NO_IRQ_STATUS 1 */ @@ -418,8 +418,8 @@ static bool rsnd_ssi_busif_err_status_clear(struct rsnd_mod *mod) status &= 0xf << (id * 4);
if (status) { - rsnd_dbg_irq_status(dev, "%s err status : 0x%08x\n", - rsnd_mod_name(mod), status); + rsnd_print_irq_status(dev, "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); rsnd_mod_write(mod, SSI_SYS_STATUS(i * 2), 0xf << (id * 4)); @@ -433,8 +433,8 @@ static bool rsnd_ssi_busif_err_status_clear(struct rsnd_mod *mod) status &= 0xf << 4;
if (status) { - rsnd_dbg_irq_status(dev, "%s err status : 0x%08x\n", - rsnd_mod_name(mod), status); + rsnd_print_irq_status(dev, "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status); rsnd_mod_write(mod, SSI_SYS_STATUS((i * 2) + 1), 0xf << 4); @@ -782,8 +782,8 @@ static void __rsnd_ssi_interrupt(struct rsnd_mod *mod,
/* DMA only */ if (is_dma && (status & (UIRQ | OIRQ))) { - rsnd_dbg_irq_status(dev, "%s err status : 0x%08x\n", - rsnd_mod_name(mod), status); + rsnd_print_irq_status(dev, "%s err status : 0x%08x\n", + rsnd_mod_name(mod), status);
stop = true; }