On Fri, 2016-08-05 at 02:35 +0000, Yang, Libin wrote:
-----Original Message----- From: Intel-gfx [mailto:intel-gfx-bounces@lists.freedesktop.org] On Behalf Of Dhinakaran Pandiyan Sent: Wednesday, August 3, 2016 10:15 AM To: intel-gfx@lists.freedesktop.org Cc: alsa-devel@alsa-project.org; tiwai@suse.de; libin.yang@linux.intel.com; Pandiyan, Dhinakaran dhinakaran.pandiyan@intel.com Subject: [Intel-gfx] [PATCH] drm/i915/dp: DP audio API changes for MST
DP MST provides the capability to send multiple video and audio streams via one single port. This requires the API's between i915 and audio drivers to distinguish between audio capable displays connected to a port. This patch adds this support via an additional parameter 'int dev_id'. The existing parameter 'port' does not change it's meaning.
dev_id = MST : pipe that the stream originates from Non-MST : -1
Affected APIs: struct i915_audio_component_ops
int (*sync_audio_rate)(struct device *, int port, int rate);
- int (*sync_audio_rate)(struct device *, int port, int dev_id,
int rate);
int (*get_eld)(struct device *, int port, bool *enabled,
unsigned char *buf, int max_bytes);
int (*get_eld)(struct device *, int port, int dev_id,
bool *enabled, unsigned char *buf, int max_bytes);
struct i915_audio_component_audio_ops
void (*pin_eld_notify)(void *audio_ptr, int port);
void (*pin_eld_notify)(void *audio_ptr, int port, int dev_id);
This patch makes dummy changes in the audio drivers for build to succeed.
Signed-off-by: Dhinakaran Pandiyan dhinakaran.pandiyan@intel.com
drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/intel_audio.c | 82 +++++++++++++++++++++++++++++--
include/drm/i915_component.h | 6 +-- include/sound/hda_i915.h | 11 ++--- sound/hda/hdac_i915.c | 9 +++-- sound/pci/hda/patch_hdmi.c | 7 ++-- 6 files changed, 82 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 65ada5d..8e4c8c8 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2054,7 +2054,7 @@ struct drm_i915_private { /* perform PHY state sanity checks? */ bool chv_phy_assert[2];
- struct intel_encoder *dig_port_map[I915_MAX_PORTS];
- struct intel_encoder *av_enc_map[I915_MAX_PIPES];
We may still need save the port number info. In non-MST mode, device entry means nothing. This means av_enc_map[pipe] may not get the right intel_encoder
Regards, Libin
We find the encoder using port in get_saved_encoder()
/* * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 8c493de..cbe44c8 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -500,6 +500,9 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder) struct i915_audio_component *acomp = dev_priv->audio_component; struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); enum port port = intel_dig_port->port;
enum pipe pipe = crtc->pipe;
int dev_id = -1;
connector = drm_select_eld(encoder); if (!connector)
@@ -522,14 +525,19 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder) dev_priv->display.audio_codec_enable(connector, intel_encoder, adjusted_mode);
- if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
dev_id = pipe;
- mutex_lock(&dev_priv->av_mutex); intel_encoder->audio_connector = connector;
- /* referred in audio callbacks */
- dev_priv->dig_port_map[port] = intel_encoder;
dev_priv->av_enc_map[pipe] = intel_encoder; mutex_unlock(&dev_priv->av_mutex);
if (acomp && acomp->audio_ops && acomp->audio_ops-
pin_eld_notify)
acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
audio_ptr, (int) port);
acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
audio_ptr,
(int) port, dev_id);
}
/** @@ -542,22 +550,29 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder) void intel_audio_codec_disable(struct intel_encoder *intel_encoder) { struct drm_encoder *encoder = &intel_encoder->base;
struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = to_i915(dev); struct i915_audio_component *acomp = dev_priv->audio_component; struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); enum port port = intel_dig_port->port;
enum pipe pipe = crtc->pipe;
int dev_id = -1;
if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
dev_id = pipe;
if (dev_priv->display.audio_codec_disable) dev_priv->display.audio_codec_disable(intel_encoder);
mutex_lock(&dev_priv->av_mutex); intel_encoder->audio_connector = NULL;
- dev_priv->dig_port_map[port] = NULL;
dev_priv->av_enc_map[pipe] = NULL; mutex_unlock(&dev_priv->av_mutex);
if (acomp && acomp->audio_ops && acomp->audio_ops-
pin_eld_notify)
acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
audio_ptr, (int) port);
acomp->audio_ops->pin_eld_notify(acomp->audio_ops-
audio_ptr,
(int) port, dev_id);
}
/** @@ -628,8 +643,32 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev) return dev_priv->cdclk_freq; }
-static int i915_audio_component_sync_audio_rate(struct device *dev,
int port, int rate)
+static struct intel_encoder *get_saved_encoder(struct intel_encoder *av_enc_map[],
int port, int dev_id)
+{
- enum pipe pipe;
- struct drm_encoder *encoder;
- if (dev_id >= 0 && dev_id < I915_MAX_PIPES)
return av_enc_map[dev_id];
- for (pipe = PIPE_A; pipe < I915_MAX_PIPES; pipe++) {
if (!av_enc_map[pipe])
continue;
encoder = &av_enc_map[pipe]->base;
if (port == enc_to_dig_port(encoder)->port)
return av_enc_map[pipe];
- }
- return NULL;
+}
+static int i915_audio_component_sync_audio_rate(struct device *dev, int port,
int dev_id, int rate)
{ struct drm_i915_private *dev_priv = dev_to_i915(dev); struct intel_encoder *intel_encoder; @@ -649,15 +688,16 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, return 0;
mutex_lock(&dev_priv->av_mutex);
- /* 1. get the pipe */
- intel_encoder = dev_priv->dig_port_map[port];
- /* intel_encoder might be NULL for DP MST */
- intel_encoder = get_saved_encoder(dev_priv->av_enc_map, port,
dev_id); if (!intel_encoder || !intel_encoder->base.crtc || intel_encoder->type != INTEL_OUTPUT_HDMI) { DRM_DEBUG_KMS("no valid port %c\n", port_name(port)); err = -ENODEV; goto unlock; }
- crtc = to_intel_crtc(intel_encoder->base.crtc); pipe = crtc->pipe; if (pipe == INVALID_PIPE) {
@@ -702,7 +742,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, }
static int i915_audio_component_get_eld(struct device *dev, int port,
bool *enabled,
struct drm_i915_private *dev_priv = dev_to_i915(dev); @@ -710,17int dev_id, bool *enabled, unsigned char *buf, int max_bytes) {
+750,21 @@ static int i915_audio_component_get_eld(struct device *dev, int port, const u8 *eld; int ret = -EINVAL;
- mutex_lock(&dev_priv->av_mutex);
- intel_encoder = dev_priv->dig_port_map[port];
- /* intel_encoder might be NULL for DP MST */
- if (intel_encoder) {
ret = 0;
*enabled = intel_encoder->audio_connector != NULL;
if (*enabled) {
eld = intel_encoder->audio_connector->eld;
ret = drm_eld_size(eld);
memcpy(buf, eld, min(max_bytes, ret));
}
- intel_encoder = get_saved_encoder(dev_priv->av_enc_map, port,
dev_id);
if (!intel_encoder) {
mutex_unlock(&dev_priv->av_mutex);
return ret;
}
ret = 0;
*enabled = intel_encoder->audio_connector != NULL;
if (*enabled) {
eld = intel_encoder->audio_connector->eld;
ret = drm_eld_size(eld);
memcpy(buf, eld, min(max_bytes, ret));
}
mutex_unlock(&dev_priv->av_mutex);
diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h index b46fa0e..1419c98 100644 --- a/include/drm/i915_component.h +++ b/include/drm/i915_component.h @@ -64,7 +64,7 @@ struct i915_audio_component_ops { * Called from audio driver. After audio driver sets the * sample rate, it will call this function to set n/cts */
- int (*sync_audio_rate)(struct device *, int port, int rate);
- int (*sync_audio_rate)(struct device *, int port, int dev_id, int
+rate); /** * @get_eld: fill the audio state and ELD bytes for the given port * @@ -77,7 +77,7 @@ struct i915_audio_component_ops { * Note that the returned size may be over @max_bytes. Then it * implies that only a part of ELD has been copied to the buffer. */
- int (*get_eld)(struct device *, int port, bool *enabled,
- int (*get_eld)(struct device *, int port, int dev_id, bool *enabled, unsigned char *buf, int max_bytes); };
@@ -97,7 +97,7 @@ struct i915_audio_component_audio_ops { * status accordingly (even when the HDA controller is in power save * mode). */
- void (*pin_eld_notify)(void *audio_ptr, int port);
- void (*pin_eld_notify)(void *audio_ptr, int port, int dev_id);
};
/** diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h index 796cabf..5ab972e 100644 --- a/include/sound/hda_i915.h +++ b/include/sound/hda_i915.h @@ -10,8 +10,9 @@ int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable); int snd_hdac_display_power(struct hdac_bus *bus, bool enable); void snd_hdac_i915_set_bclk(struct hdac_bus *bus); -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate); -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, +int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
int dev_id, int rate);
+int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, +int dev_id, bool *audio_enabled, char *buffer, int max_bytes); int snd_hdac_i915_init(struct hdac_bus *bus); int snd_hdac_i915_exit(struct hdac_bus *bus); @@ -29,13 +30,13 @@ static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus) { } static inline int snd_hdac_sync_audio_rate(struct hdac_device *codec,
hda_nid_t nid, int rate)
hda_nid_t nid, int dev_id, int rate)
{ return 0; } static inline int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
bool *audio_enabled, char *buffer,
int max_bytes)
int dev_id, bool *audio_enabled,
char *buffer, int max_bytes)
{ return -ENODEV; } diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index c9af022..6ea63ac 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -201,7 +201,8 @@ static int pin2port(struct hdac_device *codec, hda_nid_t pin_nid)
- This function sets N/CTS value based on the given sample rate.
- Returns zero for success, or a negative error code.
*/ -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate) +int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
int dev_id, int rate)
{ struct hdac_bus *bus = codec->bus; struct i915_audio_component *acomp = bus->audio_component; @@ -212,7 +213,7 @@ int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate) port = pin2port(codec, nid); if (port < 0) return -EINVAL;
- return acomp->ops->sync_audio_rate(acomp->dev, port, rate);
- return acomp->ops->sync_audio_rate(acomp->dev, port, dev_id, rate);
} EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
@@ -236,7 +237,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
- thus it may be over @max_bytes. If it's over @max_bytes, it implies
- that only a part of ELD bytes have been fetched.
*/ -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, +int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, +int dev_id, bool *audio_enabled, char *buffer, int max_bytes) { struct hdac_bus *bus = codec->bus; @@ -249,7 +250,7 @@ int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, port = pin2port(codec, nid); if (port < 0) return -EINVAL;
- return acomp->ops->get_eld(acomp->dev, port, audio_enabled,
- return acomp->ops->get_eld(acomp->dev, port, dev_id,
audio_enabled, buffer, max_bytes); } EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld); diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index d0d5ad8..077d48a 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1485,7 +1485,7 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
mutex_lock(&per_pin->lock); eld->monitor_present = false;
- size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
- size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid, -1, &eld->monitor_present, eld->eld_buffer, ELD_MAX_SIZE); if (size > 0) {
@@ -1739,7 +1739,8 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo, /* Call sync_audio_rate to set the N/CTS/M manually if necessary */ /* Todo: add DP1.2 MST audio support later */ if (codec_has_acomp(codec))
snd_hdac_sync_audio_rate(&codec->core, pin_nid, runtime-
rate);
snd_hdac_sync_audio_rate(&codec->core, pin_nid, -1,
runtime->rate);
non_pcm = check_non_pcm_per_cvt(codec, cvt_nid); mutex_lock(&per_pin->lock);
@@ -2285,7 +2286,7 @@ static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg, snd_hda_codec_set_power_to_all(codec, fg, power_state); }
-static void intel_pin_eld_notify(void *audio_ptr, int port) +static void intel_pin_eld_notify(void *audio_ptr, int port, int dev_id) { struct hda_codec *codec = audio_ptr; int pin_nid; -- 2.5.0
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx